iFlight Alpha A85 HD Whoop w/Caddx Nebula Digital HD System

Let’s welcome the iFlight Alpha series, a new way to fly FPV. Ever wanted to try Digital FPV on the smallest possible whoop size quad? iFlight stuck the Caddx Vista and the new Caddx Nebula cam (version 2 with improved firmware) on one of their new 2-inch whoop frames and did some tuning to find the optimal ratio between weight and power.

The Alpha A85 is our answer to the problem of flight time efficiency while maintaining sufficient power on a Digital HD whoop.

Features

• 84.5 grams (without battery)
• Butter smooth XING1303 5000KV，more torque and efficiency with longer flight times compared to 1105 motors
• Ducts to protect the sensitive environment or yourself
• Pre-tuned with smooth cinematic settings
• iFlight Albatross 5.8G light antenna upgrade (included)
• iFlight Albatross 900mhz light micro antenna upgrade (included with every Crossfire Nano RX)

Specifications

• SucceX-D 20A Whoop F4 AIO Board
• XING 1303 5000KV FPV Micro Motor
• Wheelbase: 85mm
• Body size: 125*125mm
• Ducted propeller size: 2 inch
• FC pattern: 25.5*25.5mm
• FPV cam spacing: 14mm
• Weight: 84.5g (without battery)
• Flight time: 5-7 min cruising (4S 450mAh)

FACTORY SETUP and WIRING DIAGRAM

This BNF comes pre-built and setup with all necessary parameters to bind-and-fly. We also added a basic filter and PID tuning as well as some Betaflight tweaks to enhance the flight experience.

Reflashed your drone but didn’t backup the setup? Messed up the whole tune and want our factory tune back?
No need to worry! All Factory Dumps and Wiring Diagrams can be found on our Google Drive: LINK

FC // SucceX-D 20A F4 Whoop AIO

• Size：30.5*30.5mm
• Mounting pattern：25.5*25.5mm/φ3mm
• Connector：Micro-USB
• MCU：STM32F411
• Gyro：MPU6000
• Blackbox：8MB
• BEC output：5V 2A/10V 2A
• INA pad：UART2 (nR2)
• Barometer：no
• Constant current：20A，25A（Burst）
• Input：2-5S
• Current sensor：yes
• BLHeli：BLHeli-S
• ESC Telemetry：no
• Target：IFLIGHT_F411_PRO
• ESC Firmware：G-H-30 BLS

Additional Suggested Parts

• DJI HD FPV Goggles
• Radio Controller – Based on Receiver Choice
• Battery 4S 450mAh

Important

The DJI Remote Controller is recommended for beginners since you won’t need to set up another receiver, but it is also optional in this BNF drone because it is NOT required in order to use the FPV system. If you don’t choose to use the DJI Remote Controller, you can choose a receiver option for your transmitter and then bind to your own radio as usual.

Includes

Alpha A85 HD Quad BNF Included Components and Parts

• Prebuilt and tested Quadcopter
• 1x Alpha 85mm Frame
• 1x Caddx Nebula Digital HD System Kit
• 1x Albatross LHCP ipex 5.8g light antenna
• 2sets HQ 2 inch 4-blades (Set of 4 – Color May Vary)
• 1x iFlight Lipo Strap