Rekon35 Nano Long Range Analog FPV Drone – PNP

The Rekon 3.5 is what I always wanted the original #MicroLongRage to be; Sub 250g and powered by a 2S Li-Ion!  Two years ago, the components to make such a concept work properly just weren’t available: Electronics were not running reliably when the power supply dropped below 5V, efficient motor-prop combos with the right size weren’t available and building DIY 2S Li-Ion packs was laborious. But the FPV industry has made a stunning amount of progress and today, with the support of HGLRC the Rekon 3.5 is finally making it happen. You can simply use cheap off-the-shelf 18650 batteries and the electronics are so reliable that in an emergency you can empty the Li-Ion batteries way below the recommended voltage without any impact on the FPV video feed and radio control link. – Dave C_FPV

Features

• Efficient and quiet sub 250g 3.5” platform with 15+ min flight time
• 1303.5 5500kV motors ensure a decent flight performance
• Works with any high-discharge 18650
• Integrated Reliable power supply for the DJI vista unit
• Capable of carrying a Naked GoPro or Insta 360 go type camera
• Fully long-range capable GPS and return to home functions

A few things to note before you buy

Our experiences with the Rekon 3 have shown that the type of 18650 batteries used can affect the performance of the quad and might lead to misfunctions. Please be careful to slowly test out the flight time limits of the specific batteries you are using

Unfortunately, diodes performing well enough to serve as a reverse polarity protection without significantly impacting performance simply don’t exist. Therefore, please be aware that the Rekon3.5 has no reverse polarity protection and inserting the batteries the wrong way will permanently damage the electronics

Flight Controller Manual

• Zeus10_AIO_manual

Specifications

Name:Rekon35 Nano Long Range FPV Drone – Analog Version

Weight:117g (Weight without receiver)

Rekon35 LR Frame
Type:3.5-inches Frame
Wheelbase:160mm
Propeller support:3.5 Inches

Zeus10 AIO 2-6S flight controller
Input voltage:2-6S
Flight control firmware:BF ZEUSF4EVO
ESC firmware:BL_S/P_H_10
Size:32.5×32.5mm

Zeus nano VTX 350mW video
Output power:PIT/25/100/200/350mW
Input voltage:DC 5V

Caddx Ratel 2 FPV Camera
Input Power:DC 5-40V
Dimensions:19mm*19mm*20mm

Rekon 1303.5 KV5500 brushless motor
Input voltage:7.4V (2S)
Recommended blade:3 inches

M80 GPS
Power Supply:5V
Size:18.5mm x 18.5mm x 7.1mm

GEMFAN 3520 3.5 inch 3-blades propeller
Quantity:4 CW & 4 CCW

Includes

• 1x Rekon3.5 Long Range Frame
• 1x Zeus10 AIO flight controller
• 1x Zeus nano VTX 350mW
• 1x Caddx Ratel 2 FPV Camera
• 4x Rekon 1303.5 KV5500 brushless motor
• 1x M80 GPS
• 8x GEMFAN 3520 3.5-inch 3-blades propeller
• 1x IPEX Hammer mini Antenna
• 1x receiver (optional)

Recommended battery

• 2x 18650-3000mAh (the drone needs 2S Power)