Rc Parts Catalog, United Kingdom
Home > Chimera7 Analog 6S Long Range BNF Quadcopter
Chimera7 Analog 6S Long Range BNF Quadcopter

Chimera7 Analog 6S Long Range BNF Quadcopter

Product #: 135874
Stock:
In Stock
Store:
UnmannedTech
 
Reviews:

GPS functionality to find your way back and Betaflight GPS Rescue mode ready to setup (default OFF to prevent unexpected behaviour; Setup instructions included). Vertical and horizontal TBS Crossfire antenna mounts are included to cover you and your antenna dead-ends just in case. GoPro universal TPU bottom stand included; fits your original GoPro bracket and our TPU GoPro protectors (additional).

Note: VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you’re flying legal frequencies and use our prepared Betaflight VTX tables according to your region.

Features

  • 6mm rigid arm design for more stiffness
  • Top- and bottom battery mount option
  • 1300Kv XING 2806.5 efficient wide stator motors
  • GPS pre-installed for more safety at distance
  • GoPro TPU bottom stand (GoPro protector not included)
  • 360° TPU protection, FPV cam protection and antenna mounts
  • 800mW high power adjustable VTX
  • No props in view
  • Battery voltage LED status light (illuminated IF logo on the bottom)

Pre Tuned and Setup

  • Pre tuned by Iflight, a general PID- and Filter tuning was applied for a great flight experience!
  • To restore lost tunes or updates, please check out Iflight CLI FIrmware settings here
  • Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!
  • GPS Rescue is OFF by default to prevent from unwanted or unexpected drone behaviour as this is still an experimental feature.  Please see our article on how to enable GPS rescue mode

Specifications

Frame: Chimera7

  • Wheelbase: 320mm
  • Main body dimension: 285*199mm
  • Bottom to top distance: 20mm
  • Arm thickness: 6mm
  • Bottom plate thickness: 3mm
  • Top plate thickness: 2mm
  • Upper(middle) plate thickness: 3mm
  • Camera plate thickness: 3mm (included TPU inserts)

Succex-D F7 Stack

SucceX-D F7 V2.2 TwinG

  • – MCU: 216MHz STM32F722
  • – Gyro:2x ICM20689
  • – Baro: YES
  • – Blackbox:32MB
  • – Betaflight OSD: YES
  • – BEC: 5V 2.5A / 9V 2.5A
  • – Current sensor scale: 100
  • – Inverter for SBUS input (UART2-RX)
  • – Smartaudio & Tramp VTX protocol supported
  • – Beeper pad : Yes
  • – RSSI input pad: No
  • – UARTs:5
  • – Motor outputs: 8
  • – 8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5)
  • – 6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V)
  • – BLHeli32 Telemetry:RX5
  • – Input voltage:recommended 2-6S, MAX 8S
  • – Firmware Target: IFLIGHT_F722_TWING
  • – Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ3mm
  • – Dimensions: 36*36mm
  • – Weight: 7.5g
  • – USB type-C

ESC // SucceX 50A

  • – MCU: STM32F051
  • – Up tp 48kHz PWM frequency
  • – Capacitance: 470uF/50V
  • – Current Sensor: Yes
  • – Input: 2-6S LIPO
  • – Constant: 50A / Burst: 60A
  • – BlHeli32 telemetry: Yes
  • – BEC: No
  • – Supports up to Dshot1200, Proshot, Oneshot, Multishot
  • – Target: iFlight-BL32-4IN1
  • – Weight: 14.4g
  • – Mounting pattern: 30.5*30.5mm/Φ3mm
  • – Dimensions: 43*39mm (including the power pads)

VTX// SucceX Force 5.8GHz 800mW VTX Adjustable

  • Item: SucceX-Force 800mW adjustable VTX
  • Input voltage: 7-36V
  • Output voltage/ Max current: 5V 1A
  • 12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@100mW,250mA@400mW, 380mA@800mW
  • Channel: 40
  • size:36*36*3mm
  • PIT/25mW/100mW/400mW/800mW

Includes

Pre-built and indoor tested Quadcopter

  • 1x Chimera7 frame
  • 1x GoPro TPU bottom stand incl. lock screw
  • 1x RaceCam R1 Mini 1200TVL 2.1mm 19*19
  • 1x Albatross RHCP SMA 5.8GHz 150mm antenna
  • 2 sets x Gemfan tri-blade 7040 props (Set of 4 – Color may vary)
  • 4x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)

Promotion vidoes