Rc Parts Catalog, United Kingdom
Home > Happymodel Mobula6 ELRS BNF Brushless Whoop (2.4Ghz/868Mhz)
Happymodel Mobula6 ELRS BNF Brushless Whoop (2.4Ghz/868Mhz)

Happymodel Mobula6 ELRS BNF Brushless Whoop (2.4Ghz/868Mhz)

Product #: 134883
Price:
Stock:
In Stock
Store:
UnmannedTech
 
Reviews:

ExpressLRS is currently the most popular remote control link system. It has the characteristics of low latency and high packet rate, and its link quality is very reliable. Now we are happy to sell one of the most popular tiny whoops (Mobula6) in ELRS form. The new Mobula6 ELRS also includes new 0702 brushless motor, one of the lightest brushless motors in the world. Make the Mobula6 your go to whoop drone this Tiny Whoop Season.

Key Features

  • AIO Flight controller with ELRS Receiver and 5.8G VTX
  • Super light 1S 65mm Brushless whoop only 18.7g
  • Equipment with the lightest brushless motors-SE0702 only 1.46gram
  • Runcam Nano3 The lightest 1/3 CMOS 800TVL Camera
  • Smooth and powerful
  • Compatible for 1S Lipo/LIHV

Specification

  • Brand: Happymodel
  • Item Name: Mobula6 ELRS 1S 65mm Brushless whoop drone BNF version
  • Wheelbase: 65mm
  • Size: 80mm*80mm*37mm
  • Weight: 18.7g
  • Voltage:1S
Version 2.4GHz ELRS 
915MHz ELRS
868MHz ELRS 
Color
Green
Blue
Blue
Flight controller ELRS F4 2G4 CrazyF4 ELRS CrazyF4 ELRS
Firmware target CRAZYBEEF4SX1280 CRAZYBEEF4DX CRAZYBEEF4DX
Built-in ExpressLRS receiver SPI 2.4GHz Serial-base 915MHz Serial-base 868MHz
Built-in Dshot ESC 5A 5A 5A
Receiver antenna plug SMD ceramic antenna IPEX MHF3 IPEX MHF3
Onboard VTX power 25mw~200mw 25mw~200mw 25mw~200mw
Brushless Motor 0702 KV26000 0702 KV26000 0702 KV26000
Propeller HQPROP 31mm Bi-blade HQPROP 31mm Bi-blade HQPROP 31mm Bi-blade
Battery 1s 300mah Lipo battery 1s 300mah Lipo battery 1s 300mah Lipo battery

Detailed Component Specifications

Motor Mode: SE0702 KV26000
Configu-ration:9N12P
Stator Diamter:7mm
Stator Length:2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len):Φ9.5mm*14mm
Weight(g):1.46g
No.of Cells(Lipo):1S only
Propellers HQprop31mmx2
Center Thickness:5mm
Prop Disk Diameter:31mm
Center Hole Inner diameter:1.0mm
Weight:0.2g
Flight controller ELRS F4 2G4 flight controller built-in SPI expresslrs 2.4G receiver
CrazyF4 ELRS flight controller built-in 915MHz expresslrs receiver
CrazyF4 ELRS flight controller built-in 868MHz expresslrs receiver
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G VTX
Built-in ExpressLRS 2.4G/915MHz/868MHz receiver
Built-in 5V 1A BEC
Built-in voltage detection
Onboard 4in1 ESC MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_H_5_REV16_7.HEX
Default protocol: DSHOT600
Onboard SPI ExpressLRS 2.4GHz Receiver (Optional) Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
RF Frequency: 2.4GHzAntenna : SMD antenna
Telemetry output Power: <12dBmReceiver protocol:  SPI ExpressLRS
Could bind with Happymodel ES24TX , ES24TX Lite, ES24TX Slim and DIY 2.4GHz ELRS TX module ExpressLRS version 1.0.0 or 1.0.1 both compatible
Onboard Serial-based ELRS Receiver ( Optional) Operation current: ~100Ma
Rx To FC protocol: CSRF
RF Frequency optional: 915mhz or 868mhz(EU)
Antenna connector:  IPEX4
Telemetry output Power: <17dBmFirmware target: Happymodel_RX_ES915RXReceiver protocol: CRSF
Could bind with Happymodel ES915TX , Frsky R9M and DIY ELRS TX module(need to flash the same version ELRS firmware)
Firmware flash via Betaflight pass-through
Onboard 5.8g VTX Output power: 25mw~200mw
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Frequency: 5.8GHz 5bands 40 channels
With Race bandSmartaudio ready
Runcam Nano3 Model: RunCam Nano 3
Image Sensor: 1/3″ CMOS
Horizontal Resolution: 800TVL
Lens : 2.1mm(M8) FOV 160°
Signal System: PAL/NTSC Non Switchable
S/N Ratio: >50dB
Electronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Min. Illumination: [email protected]
D-WDR: Auto
Day/Night: Color
Power:DC 3-5.5V
Current: 110mA@5V [email protected]
Housing Material: ABS
Net Weight: 1.2g
Dimensions: L14mm*W14mm*H9mm
Lipo Battery Capacity:300mAh
Voltage:3.8v
Continuous Discharge Rate: 30C
Size: 57mmx12mmx7mm
Weight: 8gConnector: PH2.0

Included

  • 1x Mobula6 1S FPV Racing Drone
  • 4x 1S 300mAh 30C Lipo Battery
  • 1x 1S Lipo/LIHV USB Charger
  • 1x Propeller disassemble Tool

 


Promotion vidoes