SpeedyBee F7 V2 30×30 Flight Controller for DJI

Features

• DJI Plug and Play
• Built in Wi-Fi and Bluetooth
• Camera control pad
• Blackbox
• 6 Uarts, buzzer pad, and I2C

Specifications

• MCU: STM32F722
• IMU: MPU6000
• USB: Type-C
• Baro: BMP280 (I2C)
• OSD: BetaFlight OSD w/ AT7456E chip
• BLE Support, used for Flight Controller configuration
• WiFi Support, used for data transfer, e.g firmware
• flashing, and Blackbox analysis.
• DJI Air Unit plug: A full DJI Air Unit JST slot onboard
• BlackBox: 16MB onboard dataflash
• Current Sensor 1 : 10 (Scale 168)
• BetaFlight Camera Control Pad: Yes
• Power input: 3S – 6S Lipo
• 5V power output 7 * 5V output, 6 pads and a BZ+ pad used for Buzzer, the maximum load current is 2.5A. 9V * 1,
• the maximum load current is 2.5A.
• 9V power output 2 * 9V output, 1 pads and another one used for DJI slot
• 4.5V power output 1 * 4.5V output pad
• 3.3V power output 1 * 3.3V output pad, the maximum load current is 500mA.
• ESC signal M1 – M4
• UART: Full UART * 5(UART1, UART2, UART3, UART5, UART6)
• ESC Telemetry: UART UART4 RX
• I2C: Used for external Magnetometer, Sonar, etc.
• LED: pin Used for WS2812 LED
• Buzzer: BZ+ and BZ- pad used for 5V Buzzer
• Boot button: Yes
• RSSI input: Yes
• SmartPort: Supported
• Support Flight Controller Firmware BetaFlight(Default), EMUFlight
• Target: SPEEDYBEEF7V2
• Mounting: 30.5×30.5mm, 4mm hole size
• Dimension 41x38x6.9mm
• Weight 9g

Wiring Guide

Includes

• 1x SpeedyBee F7 V2 30×30 Flight Controller for DJI