Speedybee Stack (4in1 + FC)

The Speedybee stack features an F7 V2 AIO flight controller and 45A 4in1 ESC.

The Speedybee F7 V2 FC integrates bluetooth and wifi for easy changing of parameters and firmware via the Speedybee app. The flight controller also features an F7 MCU with onboard blackbox logging and supports direct connection of a DJI air unit via a dedicated connection port.

The Speedybee 45A 4in1 ESC supports 45A continuous output and 55A burst. The ESC takes a 2-6S output and runs BLHeli_32 firmware.

FC Specifications:

- MCU STM32F722
- IMU MPU6000
- USB Type-C
- Baro BMP280 (I2C)
- OSD BetaFlight OSD w/ AT7456E chip
- BLE Support, used for Flight Controller configuration
- WiFi Support, used for data transfer, e.g firmware
- flashing, and Blackbox analysis.
- DJI Air Unit slot A full DJI Air Unit JST slot onboard
- BlackBox 16MB onboard dataflash
- Current Sensor 1 : 10 (Scale 168)
- BetaFlight Camera Control Pad Yes
- Power input 3S - 6S Lipo
- 5V power output 7 * 5V output, 6 pads and a BZ+ pad used for Buzzer, the maximum load current is 2.5A. 9V * 1,
the maximum load current is 2.5A.
- 9V power output 2 * 9V output, 1 pads and another one used for DJI slot
- 4.5V power output 1 * 4.5V output pad
- 3.3V power output 1 * 3.3V output pad, the maximum load current is 500mA.
- ESC signal M1 - M4
- UART Full UART * 5(UART1, UART2, UART3, UART5, UART6)
- ESC Telemetry UART UART4 RX
- I2C Used for external Magnetometer, Sonar, etc.
- LED pin Used for WS2812 LED
- Buzzer BZ+ and BZ- pad used for 5V Buzzer
- Boot button Used to easy enter DFU mode
- RSSI input RSSI input solder pad
- SmartPort Use any TX pad of UART for the SmartPort feature.
- Support Flight Controller Firmware BetaFlight(Default), EMUFlight
- Target name SPEEDYBEEF7V2
- Mounting 30.5 x 30.5mm, 4mm hole size
- Dimension 41 x 38 x 6.9mm
- Weight 9g

4in1 Specifications:

- Firmware BLHeli32 SpeedyBee 4in1
- MCU STM32F051
- Continuous Current 45A * 4
- Burst Current 55A(10S)
- ESC Protocol DSHOT300/600/1200
- Power input 3S - 6S LiPo
- Power output VBAT
- Current Sensor Support (Scale 168)
- ESC Telemetry Support
- Mounting 30.5 x 30.5mm, 4mm hole size
- Dimension 41 * 45 * 6.5mm
- Weight 12.5g

Includes:

1x Speedybee F7 V2 AIO FC
1x Speedybee 45A 4in1 ESC (BLHeli_32)
Accessories (cables)