Matek F411 Wing Flight Controller

Overview:

The Matek F411 Wing is a dedicated flight controller for fixed wing. More compact than the F405-Wing but still fully featured. The Flight Controller features multiple high output BECs, 5V/3A for servos and 5V/2A for accessories like GPS module, RC receiver etc. The Matek F411-Wing also has a number of built in features like 2 Uart ports, BMP280 Barometer and built in OSD (On Screen Display).

Main Differences between the F411 Wing and F405 Wing:-

- Different MCU / Firmware Target
- No black box logging
- No dedicated 12V/9V BEC for FPV gear
- 5V 3A vs 5V 5A BEC for servos
- 2x uarts vs 6
- 5x servo outputs vs 7
- 1x I2C vs 2
- No RSSI input
- Current Sensor 78A VS 104A
- Smaller 3.3V BEC (200mA vs 500mA)
- M2 mounting holes
- Physically much smaller

Features:

- MCU: 100MHz STM32F411
- IMU: MPU6000 accelerometer/gyro (SPI)
- Baro: BMP280 (I2C)
- OSD: INAV OSD w/ AT7456E chip
- Blackbox: No
- VCP & 2x UARTs
- 2x Motors, 5x Servos outputs
- 1x I2C
- 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
- Built in inverter for SBUS input (UART1-RX)
- PPM: ST1 pad with softserial disabled
- SoftSerial on ST1 pad
- Battery Voltage Sensor: 1:10 (Scale 1100)
- WS2812 Led Strip : Yes
- Beeper : Yes
- RSSI: No

FC Firmware
- INAV Flight
- Target: MATEKF411

PDB
- Input voltage range: 6.5~30V (2~6S LiPo) w/TVS protection
- 2x ESC power pads
- Current Senor: 78A, 3.3V ADC, Scale 423

BEC 5V output
- Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
- Continuous current: 2 Amps

BEC Vx output
- Designed for Servos
- Voltage adjustable, 5V Default, 6V via jumper
- Continuous current: 3 Amps

BEC 3.3V output
- Designed for Baro / Compass module and Spektrum RX
- Linear Regulator
- Continuous current: 200mA

Physical
- Mounting: 24 x 24mm, Φ4mm with Grommets Φ2mm
- Dimensions: 41 x 28 x 10 mm
- Weight: 7g (Total 12g w/ bottom plate and M2 standoffs)

Included:
1x Matek F411 Wing Flight Controller 
M2 standoffs + screws