Diatone Mamba F722 APP Stack 50A Pro 4in1 + F7 FC

Overview:

Diatone's Mamba F722 APP stack gives racers an edge in competition. The latest F7 processing technology with rock-solid power from the F50 PRO 4in1 ESC means you can focus on flying, not on the limits of your equipment.

The board includes a built in wifi module that works with the SpeedyBee App and a dedicated 2812 LED Controller 

With a wide range of setup options and features, you can configure your stack however you'd like. It even has a dedicated LED controller and broken out LED pads for easy hookup. (LEDS Not included).

** Note: The STM32F722 generates alot of heat, please leave at least 5mm on both sides of the FC to give good air circulation. **

Diatone FC Specifications:

- MCU: 216MHz STM32F722RET6 32BIT
- IMU: MPU6000
- Baro: No
- OSD: BF OSD
- Blacbox: 16M Flash Memory
- Uarts: 6Set
- ESC Soft: Dshot300/600/1200
- ESC Telemetry: RX6
- LED: Blue&Orange for FC Status,Green 9V,White 5V,Red 3.3V
- Controller: 4 Set 2812 LED
- Wifi: SpeedyBee APP
- Smartaudio: Yes
- RSSI: Yes
- Buzz: Yes
- Input: 3~6S Lipo (12.6~25V)
- VTS Protection: Yes
- BEC: 5V 2.5A & 9V 2A (Max 3A)

F50 PRO 4in1 ESC Specifications

- Input Voltage: 3~6S Lipo (12.6V~25V)
- Current: 50A×4
- Burst Current: 60A (10S)
- BEC: NO
- ESC: Dshot300/600/1200
- Mounting Holes: 30.5mm/M3

Includes:

- Diatone Mamba Stack F722 APP (FC + F50 PRO 4in1)
- Standoffs + nuts + capacitor, XT60 connector