CL Racing F7 Flight Controller MPU6000 V2.1

Overview:

The latest development in the CL Racing Series - The CL Racing F7 V2.1 Flight Controller with MPU6000 Gyro. The board supports direct battery input (upto 8S) includes a 3A 5V BEC and voltage monitoring. This board features the MPU6000 which is a bit more forgiving on noisey builds then the ICM20602. The FC includes a 32Mbit Flash chip.

** Picture shows a v2.0 but you will receive a v2.1 board **

Specifications:

- MCU: STM32F722RET6 216MHz
- MPU6000 Gyro
- Build in Beta flight OSD
- Up to 8S(36V) direct battery power
- Build in Voltage monitoring resistor
- Build in 5V/3A BEC and 3.3V/250mA for system
- Led strip share 5V with 5V/3.0A BEC
- 5V OR VBAT, camera and VTX POWER VIA Pit Switch
- 6 Full UARTS: UART1, UART2, UART3, UART4, UART5, UART6
- Build in Camera Control pin with necessary resistor and capacitor
- Buzzer pads for external buzzer
- VBAT Polarity protection
- Build in 32MB Blackbox flash chip
- M4 Can be selected either led strip signal or M4 signal for RPM filtering

Includes:
- CL Racing F7 V2.1 MPU6000 Flight Controller
- JST Cable
- 4x Rubber Vibration Isolation Grommets