SpeedyBee F7 AIO Flight Controller with integrated Bluetooth module

The SpeedyBee F7 AIO Flight Controller follows on from the SpeedyBee F4 FC, which was the first flight controller ever to have Bluetooth functionality built-in. The F7 continues to boast this game-changing feature which allows you to configure and tune your Betaflight settings right from your phone via the brilliant SpeedyBee App!

All in One: The SpeedyBee F7 All in One (AIO) flight controller incorporates a Power Distribution Board (PDB), current sensor, On Screen Display (OSD), 2 Battery Eliminator Circuits (BECs) and a Bluetooth module into one single board making for a very neat installation.

F7 processor: The FC is equipped with one of the latest F7 MCUs will more than enough processing power to make it possible to use all functions within Betaflight without the processor becoming overloaded.

ICM gyro: It's equipped with an ICM20689 gyro. This gyro is known for its excellent flight characteristics and the ability to run 32 kHz running times.

Barometer: The SpeedyBee F7 AIO flight controller has a built-in BMP280 barometer. This extra sensor is unless for unlocking additional flight modes than require altitude sensing and also make it possible to add altitude telemetry to your OSD.

Built-in Bluetooth chip: The unique thing about the SpeedyBee F7 AIO flight controller is that it has an integrated Bluetooth module. With the Blueooth function and the fantastic SpeedyBee Mobile App, making changes to your quad has never been easier.

Support for 4-in-1 ESCs (direct solder / plug connection): The FC has a plug connection that is specifically intended for connecting the flight controller to a 4-in-1 ESC. This makes a setup cleaner because certain wires are no longer needed and everything is in 1 short cable harness. There are alos solder pads for each specific pin from this plug connection, so if prefer to solder direct to the FC without using the cable, you can do. 

OSD: The SpeedyBee F7 AIO flight controller has an On Screen Display (OSD) chip on board so that you can use the OSD function within Betaflight to view useful info in your FPV.

UARTs: With no less than four UARTs, this FC offers the possibility to connect various peripheral devices such as SmartAudio, Telemetry, SmartPort, GPS, etc.

Onboard BECs: The SpeedyBee F7 AIO flight controller has 2 BECs on board. A BEC for 5 volts (x5 output) and 9 volts (x1 output).

LC filter: Both the 5-volt and 9-volt BECs have a built-in LC filter which makes the power supply to peripheral equipment of these BECs as clean as possible in terms of electrical noise.

Camera Control: With the Camera Control function, this FC offers the possibility to control the OSD of a FPV camera with your transmitter (Supports RunCam and Foxeer).

ESC protocols: The FC offers support for all ESC protocols from OneShot125 to DShot1200. There are also ESC telemetry connections.

Firmware: The firmware with which this SpeedyBee F7 AIO flight controller is supplied is SPEEDYBEEF7.

Mounting platform: The FC has a mounting platform of 30.5 x 30.5 mm. These dimensions are the current standard for regular FPV frames.

KEY FEATURES: