Matek F722-SE F7 AIO Betaflight Flight Controller w/ OSD & Baro
FLIGHT CONTROLLER F722-SE AIO
STM32F722, MPU6000 & ICM20602, BMP280, BFOSD, SD Card Slot, 5x UARTs, 8x DShot outputs, PDB, Current Sensor, BEC 5V, VTX Power Siwtcher, Dual Camera Switcher.
Harness the power of a F7 processor with one of the best racing drone flight controllers out there to date, the new Matek F722-SE AIO. As flight controllers go, they don’t come much more feature rich than the F722-SE. It is loaded with an array of features and tons of room for peripherals, bringing a host of new possibilities to your multirotor or fixed wing.
This FC features top level features like dual gyros (MPU6000 / ICM20602), a powerful STM32 F7 MCU running at 216Mhz, an onboard BMP280 barometer, 5x Uarts and 8 PWM/Dshot/Proshot/Oneshot outputs. True to form, Matek have also brought new innovative features to this FC like a switchable dual camera video input and a VTX on/off power switch. As the FC is an All-in-One type, it has its PDB integrated so the ESCs and battery connection can be soldered directly to the board for a super neat and compact build.
Features:
- 5x Uarts (1,2,3,4,6) with build-in inversion
- 1x Softserial supported
- 8x Dshot/Proshot/oneshot outputs
- 1x I2C
- 4x RX6 pad(one per cornet) for BLheli32 ESC telemetry
- 4x individual ESC power/signal pads
- 1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
- 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
- – Vbat filtered output power for VTX, Switchable via AUX (modes tab-user1)
- – Dual Camera image switchable via AUX (modes tab-user2)
- Camera control: Yes
- Smartaudio & Tramp VTX protocol: Yes
- WS2812 Led Strip : Yes
- Beeper : Yes
- RSSI: Yes
- Additional ADC for INAV analog airspeed
Drivers & Softwares
- Zadig 2.3
- STM32 Virtual Com Port driver
- STM32 Virtual Com Port driver x64
- STM Flash Loader Demonstrator
- STM DeFuse Demo v3.05
BetaFlight Github
- BetaFlight GitHub
- BetaFlight FW Releases
- BF lastest build https://ci.betaflight.tech/
BetaFlight Firmware