Holybro Kakute F4 Mini V2 Flight Controller - 20x20, OSD, Baro & Compatible with DJI FPV

The Holybro Kakute F4 V2 Mini Flight Controller supports important features of Betaflight/Cleanflight, such as OSD and Dshot. The faster F4 processor gives room for future feature development, such as a fast 8 kHz PID loop rate at single-digit CPU utilization! Unlike many other F4 boards that struggle to support protocols such as FrSky SBUS and SmartPort, the Kakute F4 V2 Mini is designed to support all serial protocols at once. This FC also DJI Air Unit connectivity via plug n play harness.

We sell the FC separately and also as a stack with the Holybro Tekko32 F3 4-in-1 35A Mini ESC - please select as required from the drop-down cart menu.

Features

• Supports Betaflight and Cleanflight.
• Betaflight OSD. Change PIDs, adjust common configuration parameters, and change video transmitter channel and power level, all using your transmitter sticks and goggles.
• High-performance / low-noise IMU. MPU6000 with 6-axis gyro and accelerometer.
• Ready for autonomous flight: Integrated BMP280 barometer and SCL/SDA for use with external GPS/magnetometer units.
• Dedicated bootloader button for easy firmware flashing.
• Low-profile design fits into even very compact frames.
• Input voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “B+” pad only).
• Automatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the Kakute F4 V2mini monitors voltage directly from the battery power lead.
• On-board regulators output 5v at up to 1.0 amps and 3.3v at up to 200 mA to power peripherals such as receiver, video transmitter, FPV camera, or LED strip.
• Supports BLHeli pass-through for easy ESC upgrade and configuration.
• 2 Additional PWM output, can be used for Camera control , motor5 or motor6 after resourced.

Compatible with Ardupilot: Wiki Info.

Note: Note that the maximum voltage supported by DJI FPV air unit is 4S (16.8V). Exceeding the voltage range may damage your device.