Matek F722-STD Flight Controller with Built-In OSD

This is the F722-STD flight controller from Matek Systems that includes a built-in OSD and features a 216MHz STM32F722RET6 MCU, a BMP280 (I2C) barometer and many other features such as a micro SD BlackBox.   With all this processing power and a load of IO, this FC will give your quad-copter unrivaled stability and response.  Matek are known for designing rock solid electronics that you can trust, and this F722-STD is no exception. 

This FC is also designed to be stacked ontop of the FC-HUB-VTX via a ribbon cable.  This gives you a compact and feature packed flight stack.

Key Features:

Features:

• 3 x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
• 7 x PWM / DShot outputs without conflict
• 5 x UARTs
• 1 x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
• 1 x I2C1
• 4 x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
• 1 x Side-press button for BOOT(DFU) mode
• 1 x 16pin bottom mounted FFC Slot for FCHUB-6S or FCHUB-VTX connection
• 36x36mm PCB with 30.5mm mounting holes

Specifications:

• MCU: 216MHz STM32F722RET6
• IMU: 32K ICM20602 gyro/accelerometer (SPI)
• Baro: BMP280 (I2C)
• OSD: BetaFlight OSD w/ AT7456E chip
• Blackbox: MicroSD card slot (SD/SDHC)
• VCP, UART1, UART2, UART3, UART4, UART5
• PPM/UART Shared: UART2-RX
• Battery Voltage Sensor: 1:10
• Current Sensor: No (FCHUB-6S, FCHUB-VTX option)
• BEC 5V: No (FCHUB-6S, FCHUB-VTX option)
• LDO 3.3V: Max.300mA
• I2C1 SDA & SCL: Yes
• Camera control: Yes
• DAC: Yes
• WS2812 Led Strip : Yes
• Beeper : Yes
• RSSI: Yes

Connection Diagrams: