iFlight SucceX-E F7 45A V2 2-6S Flight Stack (MPU6000)

Features

• Gold-plated plug
• MPU6000
• BlackBox: 8MB
• Vista HD Plug-and-Play. No need to solder tiny wires.
• BAT, +5V, 3.3, Start indicator
• Smartaudio & IRC Tramp VTX protocol supported

FC // SucceX-E F7 V1.4

• MCU: STM32F22RET6 216 MHz
• Gyro: MPU6000
• Baro: DPS310 (Barometer can only be used with Betaflight 4.3.0 and above)
• OSD: IFLIGHT OSD （AT7456E）
• BEC: 5V 2.5A
• BlackBox: 8MB
• Uart: 4*UART(UART1、UART2、UART4、UART5)
• UART1 for VTX HD/Analog Telemetry
• UART2 for Receiver
• UART4 for GPS
• UART5 for ESC Telemetry
• 4×Dshot/PWM outputs
• Smartaudio & IRC Tramp VTX protocol supported
• WS2812 led Strip: Yes
• Beeper: Yes
• Firmware: IFLIGHT_SUCCEX_E_F7 4.2.0
• Outer Size: 36*36mm / 30.5*30.5/φ4 mounting
• Weight: 6.9g
• Mounting hole: 30.5*30.5mm，φ4mm
• Size: 36*36mm

ESC // SucceX-E 45A V2 2-6S BLHeli_S 4-in-1 ESC

• Dimension: 36*43mm
• Mounting Holes: 30.5*30.5mm/Φ3mm
• Weight: 15g (without wire)
• Supports 2-6S Lipo input
• EFM8BB21 MCU, 24Mhz Runs BLHeli_S 16.X Firmware
• Current sensor: YES
• BEC: NO
• Constant: 45A / Burst: 50A
• Supports: DShot150/300/600/MultiShot/OneShot etc.
• Target: G-H-30 BLS 16.7

Includes

• 1pc x SucceX-E 45A V2 2-6S BLHeli_S Dshot600 4-in-1 ESC
• 1pc x SucceX-E F7 Flight controller
• 1set x wire harness for F7 Flight controller
• 1pc x 8pin wire
• 1pc x 35v 470uF capacitor
• 8pcs x Silicone Grommets
• 1pc x XT60 connector with 14AWG wire