iFlight Succex 60A Plus V2 BLheli_32 4in1 ESC

iFlight SucceX 60A Plus 32bit BL Dshot1200 4in1 ESC was designed to give your motors smooth power with great stability and durability. The 32bit 48mHz 3-IN 1 STM32F051  MCU, Metal MOSFET, TDK MLCC Low ESR ceramic capacitors provide high efficiency and better heat dissipation.

Standard 30.5*30.5 Φ4mm  mounting holes; Vibration and impact can be perfectly avoided by adding dampers; Rational layout design with extended solder pads ensures easy fixes or adjustments; Countersunk holes on the soldering pad enable each layer board can be powered.

Excellent hardware, optimized circuit, and high-performance components enable SucceX 60A Plus 4in1 ESC to respond efficiently. All in all, it brings faster-responding speed and smoother flying experience!

Features

• 10 layers double-board stacking PCB board;
• 4oz 1.6mm thick power board(0.9mm copper ratio),better operating load capacity;
• 32bit FO51K86 MCU,48mHz running speed;
• TDK MLCC Low ESR ceramic capacitors;
• Top grade metal MOSFET;
• Rational layout, countersunk holes on extended motor soldering pad enable each layer board can be powered.

Specifications:

• Dimension: 38*36mm
• Mounting Holes: 30.5*30.5mm/Φ4mm
• Weight:16.7g
• Supports 2-6S lipo input
• STM32F051 MCU, 48Mhz Runs BLHELI 32.X Firmware
• Current sensor: Yes
• BEC: No
• Supports: DShot DShot150/300/600/1200/MultiShot/ OneShot etc.
• Target: iFlight-BL32-4IN1

Suggestions

• No additional capacitor needed up to 5S!
• But to encounter back EMF and ensure longevity of your electronics, min. 220uF Cap 35V for 4-5S, 50V for 6S on your main lead!

Package Includes:

• 4-in-1 ESC
• Power cables & ESC signal wires *1set