Emax Nighthawk X Series quadcopter Frame (X4, X5, X6)

The Nighthawk X4, X5 and X6 are the first pure X frames designed by Emax that gives you a quadcopter with supreme balance and agility. Building these quadcopters is a piece of cake with the newly designed custom PDB with dual-shielded voltage regulators, integrated XT60 battery connector, low voltage buzzer and a programmable LED strip. Furthermore, this design has cut out the need for a second carbon fibre plate as the built-in PDB acts as the top half of the main structural frame, therefore reducing the weight. 

The X frame design allows all the components to be mounted towards the centre and therefore stabilising the centre of gravity and allowing your quad to react swiftly and turn in an instant. There are three different frame kits to choose from; the Nighthawk X4, the Nighthawk X5 and the Nighthawk X6. The only difference is the length of the arms and so you have a wheelbase of 170mm, 200mm and 240mm respectively. 

As an example, the Nighthawk X6 weighs in at less than 400g with a 1000mah 4S battery and can has a great thrust to weight ratio. 

Features:

PDB:

• Built-In 5V and 12V regulators supply ample amount of clean, filtered power to the electronics.

• ESC Signal pads allow clean and efficient builds with less wire.

• Programmable RGB LEDs let user play with endless colours and features through the flight controller using Cleanflight-Configurator.

• XT60 connector is directly mounted onto the PDB (further reducing weight by eliminating heavy wires as well as risk of cutting power leads).

• Dedicated signal pads are aligned with the flight controller to allow clean connections.

ARMS:

• Change from 170, 200, or 240mm sized frame by simply swapping out arms.

• Narrow width of the face of the arms allow more thrust to pass through.

• Unique motor plate design lets the user install original EMAX Nighthawk Motor Guards.

X-CRADLE (HD CAMERA MOUNT):

Adjustable HD Camera Mount clips on top of the included top plate and locks into place. Using the screws to loosen or tighten the angle adjustment mechanism, the mount can swivel from 30-45 degrees to let your HD Cam capture the most angled speed runs.

Specifications:

Nighthawk X4:

• 170mm Motor-to-Motor distance
• 3mm thick arms - 4" length
• 1.5mm Bottom Carbon Fiber plate
• 1.5mm Top Carbon Fiber plate
• 1.5mm PDB
• PDB Power Output: Filtered 12V @ 2A and 5V @ 3A Switching Regulators
• 3 Programmable RGB LEDs (Runs on 5V)
• Weight: 85g*

Nighthawk X5:

• 200mm Motor-to-Motor distance
• 3.5mm thick arms - 5" length
• 1.5mm Bottom Carbon Fiber plate
• 1.5mm Top Carbon Fiber plate
• 1.5mm PDB
• PDB Power Output: Filtered 12V @ 2A and 5V @ 3A Switching Regulators
• 3 Programmable RGB LEDs (Runs on 5V)
• Weight: 85g*

Nighthawk X6:

• 240mm Motor-to-Motor distance
• 4mm thick arms - 6" length
• 1.5mm Bottom Carbon Fiber plate
• 1.5mm Top Carbon Fiber plate
• 1.5mm PDB
• PDB Power Output: Filtered 12V @ 2A and 5V @ 3A Switching Regulators
• 3 Programmable RGB LEDs (Runs on 5V)
• Weight: 95g*

* - Frame weight includes all hardware.