This is the F4 Magnum (V2) all-in-one FPV stack tower that will blow your socks off! This stack includes a F4 flight controller, a 4-in-1 BLHeli_S 30A ESC, a 200mW VTX and a FrSky XM+ receiver. Not only that, but the F4 Magnum stack tower supplies you with everything you need to power and control your quad such as the an integrated OSD and a power distribution board (PDB). The F4 Magnum is therefore the 6-in-1 flight stack taht you have been looking for!
Building a high performance FPV quadcopter for racing or freestyle has never been easier.
This tightly integrated systems packs the FC, ESC, RX, VTX, PDB, CURRENT SENSOR and OSD into neatly stacked boards that can be easily serviced or upgraded. The pinned board interconnects offer a clean wire free look and the compact stack can fit even the tightest builds with easy.
We have carefully combined some of the best FVP technology in our arsenal into a tightly pre-assembled package that offers the fastest way go from starting a new build to FPV Flight!
The heart of the flight control systems is a powerful STM32F405 MCU and MPU6000 gyro flashed with Betaflight for proven rocksteady flight stability. The integrated LC filter with 5v/3A voltage regulator means clean power for all the FC/OSD components and other attached boards such as VTX, RX and FPV Camera. Betaflight OSD with easily customizable layout of vital flight information and ability to change FC flight parameters. Blackbox flight log recorder with 16mb flash memory. On board buzzer for battery level warning or lost model finder functions.
VTX allows for easy change of VTX channel/band via push button. Also transmit power is switchable from 25mw to 200mw. Included is a lightweight 5.8ghz dipole whip antenna or 80mm extension cable with SMA connecter for use with your own antenna.
Genuine FrSky XM+ receiver is included with 16 channels with RSSI. It possible to connect other brands of Serial or PPM via the dedicated RX pads.
The ESC system is comprised of 4 x 30A continuous Bullet ESC’s using top quality MOSFETs and running BLHeli_S firmware. Your choice of protocol: DSHOT, Multishot, Oneshot 125. The onboard current sensor monitors mAh consumed and pass the information to OSD for an accurate way to monitor battery level and peak power consumption.
6 in 1 Main Board:
VTX Board:
4 in 1 ESC and Current Sensor Board:
Receiver:
Accessories:
Net weight: 23g
Size: 36mmx36mm
Height: The total height of whole F4 Magnum tower system with standoff kit installed is about 24mm to 25mm.
This a.i.o f/c makes for a perfect,and easy install,,,put this into the GEP-KX5 Elegant FPV Freestyle Quadcopter,,,along with EMAX RS2306 RaceSpec Motor x4. I do not race quads,,,i like to fly freestyle fpv,,having said that,i still like to fly l.o.s. All build items arrived on time as advertised,,,,will use unmanned tech,for future builds.
Add to
Wishlist