Rc Parts Catalog, United Kingdom
Contact Us
Home > Speed Controller (ESC) > CrazyF411 AIO Toothpick Flight Controller + Receiver (20A ESC, OSD, Frsky RX)
CrazyF411 AIO Toothpick Flight Controller + Receiver (20A ESC, OSD, Frsky RX)

CrazyF411 AIO Toothpick Flight Controller + Receiver (20A ESC, OSD, Frsky RX)

Product #: 128293
Price:
£29.00 Price drop alert!
Stock:
In Stock
Store:
UnmannedTech
 
Products from UnmannedTech
Categories:
Reviews:
BUY NOW
Add to Wishlist

The CrazyF411 from Happymodel is an F4 toothpick flight controller with OSD, that also managed to include 4x 20A ESC and a Frsky compatible receiver built into the board, making this flight controller ideal for a very compact and lightweight toothpick build.

The receiver also includes a PA/LNA power amplifier to enable much greater range compared to some other flight controllers with built in receivers (up to 400m range).

Features

  • 25.5×25.5mm FC AIO ESC board for toothpick .
  • Most powerful for whoop / toothpick style flight
  • Supports 2-4s battery input and provides 20A to the motors.
  • Also Integrated SPI Frsky receiver working with D8/D16 protocols.
  • This integrated receiver has PA/LNA power amplifier and the diversity antenna., This should give more control range for this flight controller.

Specification

Brand Name: Happymodel
Model: CrazyF411 AIO
Item Name:  F4 Flight Controller Built-in 20A BL_S ESC & Frsky Receiver
F4 Flight Controller MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 2-4S battery input (DC 8V-17V)
Built-in 20A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Frsky D8/D16 SPI receiverBuilt-in 2.4G Power Amplification
Built-in Betaflight OSD(SPI Control)
Built-in Current meter
Built-in 5V 1.5A BEC
Built-in voltage detection
Firmware target: MATEKF411RX
Yaw Degrees should set to “-90 degree” to match the flight direction
Onboard 20A ESC MCU upgraded to EFM8BB21
Power supply: 2-4S LiPo/LiPo HV (7v/17v)
Current: 20A continuous peak 25A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: F_H_40_REV16_7.HEX
Default protocol: DSHOT600
Internal Frsky NON-EU receiver Version SPI BUS receiver
Frsky D8/D16 compatibleCompatible Non EU transmitter both D8 mode and D16 mode
Channels: 8ch/16chDual antenna
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 400m

How to Bind your receiver

Make the on board receiver get into bind mode: For 4.0.x version firmware Plug USB and then connect betaflight configurator and then move to CLI tab , type “bind_rx_spi” ,the Red LED on the top of the flight controller will getting to be solid , the onboard receiver is in bind mode; For 4.1.x or 4.2.x the bind code is “bind_rx”

Included

  • 1x F4 AIO ESC RX Board
  • 1x Cable with Connector
  • 1x bag of Screws & Standoffs

Promotion vidoes