NCFM Wabbit Ready To Fly Kit
This is the first RTF (Ready-To-Fly) glider from NCFM:
No building. No covering. No fitting electronics. Just plug in your receiver and fly.
Important safety note: You need to balance your Wabbit per the User Manual. Failure to do so will result in unpredictable and potentially dangerous flight performance.
Airframe:
•EPP Wings
•Balsa Elevons
•Balsa Fin
•Ultracote Covering
Electronics:
•HXT900 servos (installed)
•200 mah Nimh 1/3AAA Battery Pack (installed)
•NCFM BlackJack charge switch (installed)
Virtues:
•Ready To Fly
•The perfect travel sloper
•Light air performance
•Effortless inverted flight
•Highly aerobatic
•Very stable
•Extremely Durable
Span: 24″
Wing Area: 158 Sq. In.
Average Flying Weight: 6 Ounces (with average sized micro receiver)
R/C Requirements:
Transmitter: Elevon Mixing with End-Point Adjust and/or Dual Rates
Receiver: Most of the recent low profile end-plug types / 1/2″or thinner
You’ll receive:
• Fully built and covered model and a User Manual.
You’ll need:
• A 4 channel computer R/C system with a micro receiver.
You’ll notice:
• This is a foamie glider built to the highest standards by people who know how to do this kind of stuff!
• This is NOT a molded glider…… you should expect a few wrinkles in the covering here and there.
• This glider is very durable but NOT indestructible……you should take good care of it