Matek F405 iNav Wing Flight Controller

Matek F405 Wing iNAV Flight Controller is specifically for FC for Wings and Planes and perfect for iNAV

Designed for iNAV and has a onboard barometer so perfect for fixed wing.
Matek F405 Wing FC as high output capable BECS for powering servos 5V/5A and for your fpv components there is a dedicated 12V/2A and for your receiver and GPS module 5V/2A so this is a very versatile flight controller.
Featuring also 6 UART Ports and Built in Barometer, SD Card slot for black box logging and of course a full OSD on screen display. As already mentioned these boards work perfectly with iNAV and it even has its own iNAV target in the iNAV software. This is a highly popular and recommended board as used by many fixed wing pilots round the world.

STM32F405, MPU6000, INAVOSD, BMP280, 6x UARTs, 1x Softserial, 2x I2C, 2x Motors & 7x Servos, 4x BEC & current sensor on board.

FC Specifications

    •    MCU: 168MHz STM32F405

    •    IMU: MPU6000 accelerometer/gyro (SPI)

    •    Baro: BMP280 (I2C)

    •    OSD: INAV OSD w/ AT7456E chip

    •    Blackbox: MicroSD card slot (SD/SDHC)

    •    VCP & 6x UARTs

    •    2x Motors, 7x Servos outputs

    •    2x I2C

    •    3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)

    •    Built in inverter for SBUS input (UART2-RX)

    •    PPM/UART Shared: UART2-RX

    •    SoftSerial on TX2 pad

    •    Battery Voltage Sensor: 1:10 (Scale 1100)

    •    WS2812 Led Strip : Yes

    •    Beeper : Yes

    •    RSSI: Yes

FC Firmware

    •    INAV Flight

    •    Target: MATEKF405SE

PDB

    •    Input voltage range: 9~30V (3~6S LiPo) w/TVS protection

    •    2x ESC power pads

    •    Current Senor: 104A,  3.3V ADC,  Scale 317

BEC 5V output

    •    Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed

    •    Continuous current: 2 Amps, Max.3A

BEC 9V /12V output

    •    Designed for Video Transmitter, Camera, Gimbal ect.

    •    Continuous current: 2 Amps, Max.3A

    •    12V option with Jumper pad

BEC Vx output

    •    Designed for Servos

    •    Voltage adjustable, 5V Default, 6V or 7.2V via jumper

    •    Continuous current: 5 Amps, Max.6A

    •    Output Ripple: 50mV (VIn=24V, VOut=5V@5A load)

BEC 3.3V output

    •    Designed for Baro / Compass module and Spektrum RX

    •    Linear Regulator

    •    Continuous current: 500mA

Physical

    •    Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm

    •    Dimensions: 56 x 36 x 13 mm

    •    Weight: 25g

MAIN FEATURES OF THE MATEKSYS F405-WING

F405 Wiring Layout