Iflight Nazgul5 V2 Freestyle FPV Drone 6S or 4S BNF (xm+ EU LBT)

Iflight Nazgul5 V2 Freestyle FPV Drone 6S or 4S BNF (Frsky XM+ EU LBT)

If you're  looking for the best budget 5" Analogue freestyle quad look no further. Don't let the word budget make you think this quad isn't capable, its still built to the high standard and quality of all Iflight quads but using the e series of parts. Basically the materials are a little less polished but performance is not compromised.

Please note this version comes fitted with a  FRSKY XM+ EU LBT receiver so you can bind straight to the quad and don't  need to solder a receiver. This will bind straight to a Radiomaster, Jumper or Frsky radio with ease.

Nazgul5 V2 is loaded with lots of power; it comes with the XING-E 2207（6S 1800KV / 4S 2750KV) motors, SucceX-E F4 Flight Controller, SucceX Force 5.8g 800mW VTX Adjustable, SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC, and the very popular Caddx Ratel Camera which make this quad a must-have!

Note: The colour of propellers may vary, the colour strap may vary, GoPro and GoPro mount NOT included.

Features

• 5mm arm design for more durability
• Easy-Swap arm
• LED illuminated Logo
• XING-E 2207 motors and NAZGUL 5140 props
• 5" version also fits 5.1" style propellers
• Popular True-X configuration
• TPU crash-guards
• Fits both 30.5x and 20x stacks

Specifications

• SucceX-E F4 45A flight stack
• XING-E 2207 FPV Motor（6S 1800KV / 4S 2750KV)
• Wheelbase: 240mm*240mm
• Body size: 170*170mm
• Propeller size: 5 inch /5.1 inch
• FC pattern: 30.5*30.5/20*20 mm
• FPV cam spacing: 19mm
• Weight: 393.4g (without battery)

FACTORY SETUP and WIRING DIAGRAM

This BNF comes pre-built and setup with all necessary parameters to bind-and-fly. We also added a basic filter and PID tuning as well as some more software tweaks enhance the flight experience.

Reflashed your drone but didn't backup the setup? Messed up the whole tune and want our factory tune back?
No need to worry! All Factory Dumps and Wiring Diagrams can be found on our Google Drive: LINK

FC // SucceX-E F4 Flight Controller

• MCU：STM32F405
• Gyro：MPU6000
• Betaflight OSD：YES
• Blackbox：8MB
• 4X Uarts（1 2 3 6 )
• 8 x Dshot/Proshot/Oneshot output
• 8 x individual ESC power/ signal pads
• 1 x Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX
• VTX telemetry: YES
• WS2812 led Strip：YES
• Baro：No
• Beeper：YES
• Input：2-6S（Max 8S）
• BEC：5V/2.5A cont
• Firmware target : BETAFLIGHTF4
• Mounting：30.5*30.5mm，φ4mm with Grommets φ3mm
• Dimensions：36*36mm
• Weight：7.6g

ESC // SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC

• Dimension: 40*43mm
• Mounting Holes: 30.5*30.5mm/Φ3mm
• Weight: 14.4g
• Supports 2-6S Lipo input
• STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware
• Current sensor: YES
• BEC: NO
• Supports: DShot150/300/600/1200/MultiShot/OneShot etc.
• Target: G-H-30 BLS 16.7

VTX// SucceX Force 5.8g 800mW VTX Adjustable

• The output power is stable;
• Transmit power 4 gear switch: 25mW/200mW/400mW/800mW;
• Output 48 frequency points,
• Frequency lock fast, the boot does not interfere with companions;
• Built-in output power self-check function;
• Full format video format: NTSC /PAL;
• Wide input voltage range. low power consumption:
• 7V～36V，+12V/380mA@800mW;
• -Small size:36*36*3mm
•  Mounting holes 4-M3
• Lightweight: 7.2g(excluding antenna)

VTX Specifications

• Item: SucceX-Force 800mW adjustable VTX
• Input Voltage:
• Output voltage/ Max current: 5V 1A
• 12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@200mW，250mA@500mW, 380mA@800mW
• Output 48 frequency points,
• size:36*36*3mm
• PIT/25mW/200mW/400mW/800mW

Recommended Parts (Not Included)

• Battery 4S 1550mAh
• Battery 6S 1300mAh
• GoPro Mounts

Includes

• Prebuilt and tested Quadcopter
• 1 x XL5 V5 Frame
• 1 x Caddx Ratel, 2.1mm lens camera
• 1 x Albatross LHCP RP-SMA 5.8g antenna
• 2 sets x Nazgul 5 inch 3-blades (Set of 4 - Color may vary)
• 1 x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
• 1 x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)