Rc Parts Catalog, United Kingdom
Home > FPV Drones and Accessories > HappyModel Mobula 6 Frsky 1s Brushless FPV Whoop Drone
HappyModel Mobula 6 Frsky 1s Brushless FPV Whoop Drone

HappyModel Mobula 6 Frsky 1s Brushless FPV Whoop Drone

Product #: 103614
Price:
Stock:
In Stock
Store:
Quadcopters
 
Reviews:

New Mobula 6 from Happymodel is a 1S Brushless Micro Whoop Style Drone with 19000KV Regular Freestyle or Race 25000KV Motors and with Frsky Receiver.
This tiny beast is extremely fast for its size and is perfect for both indoor and outdoor freestyle and racing.
Weighing in at only 20g and fitted with a F4 Flight Controller and Runcam Nano3 fpv camera, This will be a perfect drone to get through the winter days when indoor flying is the only option.
And at a very affordable price point which will make this appealing to new pilots and veterans wanting something small and fun.
The 24000kv will be available later but with much less flight time and battery life sacrifice hence the 19000kv is the sweet spot.

Features:
AIO 4IN1 Crazybee F4 Lite flight controller built-in 5.8G VTX
Extreme light 1S 65mm Brushless whoop only 20g
Runcam Nano3 The lightest 1/3 CMOS 800TVL Camera
Smooth and powerful
Compatible for 1S Lipo/LIHV
Camera Angle adjustable

Specifications:
Brand Name: Happymodel
Item Name: Mobula6 1S 65mm Brushless whoop drone BNF version
Wheelbase: 65mm
Size: 80mm*80mm*37mm
Weight: 20g
Receiver option:
Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode)
Motor speed option:
SE0802 KV19000(Regular Edition)

Package includes:

Item Name Qty
Mobula6 1S 65mm whoop Drone Frame 1
SPI Receiver Option1: Crazybee F4 Lite FC built-in Frsky SPI D8 RX 1
SPI Receiver Option2: Crazybee F4 Lite FC built-in Flysky SPI RX
SE0802 19000KV or 25000KV brushless motor 4
Gemfan 1219-3 Propellers(4cw+4ccw) 1
Runcam Nano3 1/3 CMOS 800TVL camera 1
5.8G 25mw 40ch vtx (Flight controller built-in) 1
1S 300mah 30C LiHV Battery 4
1S Lipo/LIHV USB Charger 1
Propeller disassemble tool 1

 Package included with the Mobula 6 drone inc spare batteries

Spare parts specifications:

Motor Mode: SE0802 19000KV or KV25000
Configu-ration:9N12P
Stator Diamter:8mm
Stator Length:2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm
Weight(g):1.9g
No.of Cells(Lipo):1S only
Propellers Gemfan 1219-3
Center Thickness:5mm
Prop Disk Diameter:31mm
Center Hole Inner diameter:1.0mm
Weight:0.28g
Flight controller (Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR
(Flysky SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G VTX
Built-in SPI Frsky/Flysky receiver
Built-in 5V 1A BEC
Built-in voltage detection
Onboard 4in1 ESC MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_H_5_REV16_7.HEX
Default protocol: DSHOT600
Onboard Frsky SPI D8 receiver Version SPI BUS receiver Frsky D8 compatible
Compatible Non EU transmitter D8 modelChannels: 8ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m
Onboard Flysky SPI receiver Version SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m
Failsafe support
Onboard 5.8g VTX Output power: 25mw
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Frequency: 5.8GHz 5bands 40 channels
With Race bandSmartaudio ready
Runcam Nano3 Model: RunCam Nano 3
Image Sensor: 1/3″ CMOS
Horizontal Resolution: 800TVL
Lens : 2.1mm(M8) FOV 160°
Signal System: NTSC
S/N Ratio: >50dBElectronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Min. Illumination: [email protected]
D-WDR: Auto
Day/Night: Color
Power:DC 3-5.5V
Current: 110mA@5V [email protected]
Housing Material: ABS
Net Weight: 1.2g
Dimensions: L14mm*W14mm*H9mm
Lipo Battery Capacity:300mAh
Voltage:3.8v
Continuous Discharge Rate: 30C
Size: 57mmx12mmx7mm
Weight: 8gConnector: PH2.0

Promotion vidoes

More Buying Options