Rc Parts Catalog, United Kingdom
Home > All Planes > Matek FCHUB-W PDB For Fixed Wing
Matek FCHUB-W PDB For Fixed Wing

Matek FCHUB-W PDB For Fixed Wing

Product #: 75367
Price:
Stock:
In Stock
Store:
HobbyRC
 
Reviews:

Overview:

The Matek FCHUB-W is a special PDB designed for Fixed Wing with 4x BEC & onboard current sensor.

This PDB is designed to stack with the Matek FC STD series of flight controllers.

Please see the Matek website for installation diagrams.

Features:

- Input voltage range: 9~30V (3~6S LiPo) w/TVS protection
- 2x ESC power pads
- Current Senor: 104A, 3.3V ADC, Scale 317
- 4x BEC on board
- 3x LED indicators for 5V, 10V & Vx

Soldering Holes & Pads
- + & – : Bettery & ESC power pads

- Curr: Current sensor output
- Vbat: Bettery voltage
- G: Ground
- 3V3: LDO 3.3V
- 5V: BEC 5V
- 10V: BEC 10V
- Vx: BEC 5V/6V/7.2V ADJ

FFC connection
- Compatible with MATEKSYS FC F405-STD, F722-STD, F405-OSD

- MT1: Motor1 of INAV Flying Wing & Airplane
- MT2: Motor2 of INAV Flying Wing & Airplane
- SV3~SV6: Servo 3~6 of INAV Flying Wing & Airplane
- VTX: Video Transmitter signal
- TX5 & RX5: UART5 of F405-STD/F722-STD/F405-OSD

BEC 5V output
- Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, GPS module

- DC/DC synchronous buck regulator
- Voltage: 5.0 +/- 0.1VDC
- Continuous current: 2 Amps, Max.3A
- Output Ripple: 20mV (VIn=24V, VOut=5V@2A load)
- Short-circuit tolerant (2 seconds)

BEC 10V output
- Designed for Video Transmitter, Gimble

- DC/DC synchronous buck regulator
- Voltage: 10.0 +/- 0.2VDC (Input voltage >11V)
- Continuous current: 2 Amps, Max.3A
- Output Ripple: 20mV (VIn=24V, VOut=10V@2A load)
- Short-circuit tolerant (2 seconds)

BEC Vx output
- Designed for Servos

- DC/DC synchronous buck regulator
- Voltage adjustable, 5V Default, 6V or 7.2V via jumper
- Continuous current: 5 Amps, Max.5.5A
- Output Ripple: 50mV (VIn=24V, VOut=5V@5A load)
- Short-circuit tolerant (2 seconds)

BEC 3.3V output
- Designed for Baro / Compass module and Spektrum RX
- Linear Regulator
- Continuous current: 500mA

Physical Dimensions
- Mounting: 30.5 x 30.5mm, Φ3mm

- Dimensions: 52 x 36 x 6 mm
- Weight: 13g

Included:

- Matek FCHUB-W PDB (Power Distribution Board)
- Mounting screws
- Right angled breakaway pins


Promotion vidoes

More Buying Options