Happymodel X1 ELRS AIO
Overview:
The Happymodel ELRS X1 flight controller comes with an integrated SPI 2.4GHz ExpressLRS receiver and 12A BlHeli_S ESC, able to support 2-4s. The X1 includes mosfet that can support 12A currents making it ideal for toothpick or long range drones. The X1 also includes a 2.4GHz ExpressLRS receiver is equipped with the SX1280 radio frequency chip with high sensitivity, high packet rate and low latency. The flight controller includes a 6 pin SH1.0 plug for CaddxFPV Vista HD VTX and 5 pin SH1.0 plug for analog VTX.
FC Specifications:
- MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
- Sensor: MPU-6000(SPI connection)
- Mount pattern: 20×20 M2Size:32mm*28mm*9mm
- Power supply: 2-4S Lipo battery
- Built-in 12A Blheli_s ESC each
- Built-in Betaflight OSD(SPI Control)
- Built-in SPI ExpressLRS 2.4GHz receiver
- Built-in 5V 1A BEC
- Flight controller firmware target: CRAZYBEEF4SX1280
4in1 Specifications:
- MCU upgraded to EFM8BB21
- Power supply: 2-4S LiPo/LiPo HV (7v/17v)
- Currents: 12A continuous peak 15A (5 seconds)
- Support BLHeliSuite programmable
- Factory firmware: F_H_40_REV16_8.HEX
- Default protocol: DSHOT150/DSHOT300/DSHOT600
Onboard SPI ELRS receiver Specifications:
- Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
- RF Frequency: 2.4GHz
- Antenna plug: IPEX
- Telemetry output Power: <12dBm
- Receiver protocol: SPI ExpressLRS
- Could bind with ELRS 2.4Ghz TX module(Recommend TX module with latest elrs firmware)
Included:
- Happymodel X1 ELRS AIO
- Accessories