Happymodel CrazybeeX AIO (FrSky)

Overview:

The Happymodel CrazybeeX is an AIO flight controller for quads like the Happymodel Crux3. The FC is a 5in1 design and features an onboard FrSky compatible receiver.

** Current stock is V2.2 **

FC Specifications:

- MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
- Sensor: MPU-6000 (SPI Connection)
- Board Size: 28.5 * 28.5mm
- Mounting: 25.5x25.5mm
- Power Supply: 1S-2S battery input (DC 2.9V-8.7V)
- Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
- Built-in Betaflight OSD(SPI Control)
- Built-in 5.8G VTX
- Built-in SPI Frsky receiver support D8/D16 (
- Built-in 5V 1A BEC
- Built-in voltage detection
 
4in1 Specifications:
- EFM8BB21
- Power Supply: 1-2S LiPo/LiPo HV
- Current: 5A continuous peak 6A (3 seconds)
- Support BLHeliSuite programmable
- Factory Firmware: S_H_50_REV16_7.HEX
- Default Protocol: DSHOT600

Onboard FrSky SPI receiver Specifications:

- SPI BUS Receiver Frsky D8/D16 Compatible
-  Support for Futaba S-FHSS (Need Betaflight 4.0.5 firmware or latest), Frsky_X_LBT(EU-LBT)
- No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m

Onboard 5.8GHz VTX
- Output Power: 25mw~200mw switchable
- Frequency: 40CH
- Input voltage: 3.3V 5.5V
- Current consumption: 300mA(type)
- Frequency: 5.8GHz 5bands 40 channels
- With Race band
- Smartaudio ready
- Default vtx_power is 3
- Should set vtx_low_power_disarm = ON to reduce the high temperature when test on the ground.

Included:

- Happymodel CrazybeeX AIO
- Accessories