VIFLY StoreSafe Smart LiPo Discharger for XT60 Batteries

Stay safe and extend the life of your batteries with ViFly's StoreSafe Smart LiPo Discharger. Storing your LiPo batteries at full voltage can reduce their lifespan and is not a safe way to store your batteries. The StoreSafe discharger is made to make it easy to store a battery by safely discharging it to its proper storage voltage. Just connect your LiPo battery and the built-in algorithm does the rest automatically, intelligently discharging as fast as possible within safe temperature limits.

In order to help keep temperatures low, the StoreSafe is equipped with a heatsink. The StoreSafe can auto-detect 2S to 6S batteries when connected, and when finished, it will go into an ultralow leaking current state to prevent overdischarge, so you can leave it connected to your battery for extended periods.

There are two versions of the StoreSafe Discharger to suit your battery type, XT60 and XT30 - please select as required.

The discharge will work with one battery at a time, however you could use a parallel adapter to connect two batteries to a single discharger. This will increase the total capacity of the battery, so it will take longer to discharge.

Features

• Up to 1 Watt discharge
• Auto-Detect 2-6S LiPo
• Built in Heatsink
• Discharges batteries to 3.85V/Cell

Note: Before using StoreSafe, please make sure that the voltage of each battery cell is higher than 3.95V. After plugging in the battery, the LED that indicates the status will flash for about 5 seconds and then enter the discharging state. If the LED status does not indicate correctly, please disconnect the battery immediately. The StoreSafe will stop discharging when your battery reaches storage voltage (3.85V±0.08V / cell) and then goes into an ultra-low leakage current (<10uA).