Turnigy Multistar 6 - 50V Dual Output 5v/5A and 12v/10A SBEC With Noise Reduction

The best way to improve multirotor efficiency and therefore flight time is to use a high voltage setup which lowers current draw. For this reason 8S (29.6v) and even 10S (37v) setups are becoming evermore popular. While there are motors and ESCs which are compatible with such high voltages, most FPV and flight electronics require 12v or less. The solution is a voltage regulator such as this Turnigy twin output 5v/12v step down DC-DC SBEC/UBEC. It supports a wide input voltage from 6 to 50v with reverse polarity protection, making it compatible with even 13S, future proofing your setup! It’s also two SBECs in one; it features dual outputs, which will simultaneously supply a constant 5Amps at 5V and 10Amps at 12V. This means you can power 12v FPV equipment, lighting etc. and also a 5v flight controller or receiver all from the same device. Finally the SBEC features an inline noise reduction filter and an output EMF coil that provides a stable and interference free output.