Pixhawk / APM XT60 90A Power Module 2-6S with 3A UBEC (V6.0)

This Power Module for the Pixhawk / APM provides a plug and play solution for powering your flight controller with clean power from a LiPo battery, as well as reporting battery voltage and current consumption for logging and live telemetry. The on-board switching regulator outputs 5.3V at a maximum of 3A, and can be used up to 28Volts (6S LiPo) with a maximum current sensing rating of 90 amps. The Power Module comes ready to use with XT60 connectors pre-fitted, and shrink wrapped for protection.

The Pixhawk and APM 2.x have a dedicated connector for attaching a Power Module (PM). This is useful because it:

• Provides a stable power supply which reduces the chances of a brown-out.
• Allows monitoring of the battery’s voltage and current and triggering a return-to-launch when the voltage becomes low or the total power consumed during the flight approaches the battery’s capacity.
• Allows the autopilot firmware to more accurately compensate for the interference on the compass from other components.

Note: The Power Module is rated at 3 Amps to power the FC, receiver and peripherals (GPS and Telemetry radio) ONLY. To power servos use an ESC with an adequate BEC or a standalone BEC plugged into the Aux output rail. 

If you have a high voltage power input, we have a 50V version of the Power Module here.

Ardupilot Power Module Instructions - Here.