Multirotor Retractable Landing Gear with Failsafe Controller 3-6S

This is a carbon fibre universal retractable landing gear kit designed to fit 450~700 class multirotors. When fixed, the gear gives over 20cm of ground clearance, which is more than enough space for a GoPro sized brushless gimbal.

A retractable landing gear has the big advantage over a typical gear in that a retractable gear allows for an unobstructed view of the sky ahead in all directions, plus they look super cool too. So if you're an aerial photographers or FPV flyer, you'll no longer get your shot spoiled by the landing skids entering the frame.

The quality of this landing gear is second to none. The retractors are of an all-metal construction, while the legs and skids are made from lightweight 3k-carbon fibre. The retractors boast a very reliable servoless high torque motor and they are powered from a seperate control unit. The controller features failsafe protection that makes sure the landing gear is deployed if the control signal is lost. The controller also includes an integrated UBEC so you don't need to worry about powering it; it's compatible with a wide voltage range, 3S to 6S. The controller needs to be connected to a spare Rx channel using a male to male servo lead, and 2-position switch on your RC transmitter is required be to control the gear.

Retractor Features:

• Robust 6061 T6 aluminium alloy construction
• 75-degree retract angle for increased stability
• Reliable mechanism with metal gearing and a high torque motor

Controller Features:

• Polarity Protection: The controller is protected against revered positive and negative polarity
• Power Up Safe: The gear will remain deployed when you power on, regardless of the gear switch position.
• Working Status Light: The LED status light will blink when the gear is in motion, once fully deployed or retracted, the LED status will go out.
• Fail Safe Protection: The landing gear will automatically deploy if the control signal is lost
• Wide Working Voltage: The controller has a built in UBEC so it's compatible with 3S-6S(12.6V-25.2V)