Jumper R1 D16 Frsky Compatible Micro Receiver with S.Port and S.bus

The Jumper R1 is a full range D16 FrSky (ACCST) compatible receiver with support for FrSky International Firmware (not EU LBT). The receiver has similar features to the FrSky R-XSR Rx, but at a more affordable price point. It’s ideal for mini-drones or models requiring an S.bus or S.port connection. It also features integrated redundancy and support for telemetry.

Binding method:

• Press and hold the receiver’s bind button, turn on the power, the receiver will now enter binding mode. The red and green LED is solid.
• Turn on the remote control and begin the bind procedure according to your radio. After the bind is successful the red light is off and the green light is always on.

Note: When the receiver loses the signal, the green light is off and the red light is flashing slowly.

Firmware Updates

The firmware should be updated via the Smart Port. You can use Frsky XSR firmware on this module if you wish, but only proceed if you know what you are doing as loading the incorrect firmware can brick the device.