Matek PDB , Power Distirbution Board ( 4 layers & 2oz copper PCB , PDB 4*30A , Support 3-6S LiPo , BEC 5V&10V , Current Sensor 184A ) for FPV Racing RC Drone Quadcopter by LITEBEE

This pdb power distribution board from a 3~6s lipo pack to 4 escs, as well as providing regulated & filtered dc 5v & dc 10v outputs for powering cameras, rc receiver, flight controllers, video transmitters, leds, etc.

Built-in current sensor 184a, pdb: 4*30a (4*46a, 5 seconds), 4layers*2oz copper pcb. Great combo with matek f405 flight controller.

Built-in 184a current sensor, and offers a ffc socket to connect the mateksys flight controller conveniently.

Total 4 pairs esc solder tabs are fit for x frame such as qav-r qav-x martian, gep-ax5.

5v & 10v output led indicators & short circuit tolerant, 10v instead of 12v help keep components cooler while still in their working range. Check manual here http://www.mateksys.com/downloads/FCHUB-6S_manual.pdf

Tips: This PDB distributes power from a 3~6S LiPO pack to 4ESCs,as well as providing regulated & filtered DC 5V & DC 10V outputs for powering cameras,RC receiver,Flight controllers,Video Transmitters,LEDs,etc.

It also has built-in 184A current Sensor, and offers a FFC socket to connect the MATEKSYS Flight Controller conveniently.

Function:
1. Total 4 pairs ESC solder tabs are fit fox X type frame
2. Max. 27V input w/TVS protection
3. Built current sensor 184A
4. PDB:4*30A(4*36A,5 seconds)
5. 4 layers*2oz copper PCB
6. BEC 5V/1.5A(2A Max) w/100uf panasonic POSCAP filter
7. BEC 10V/1.5A(2A Max) w/47uF TDK MLCC filter
8. 5V & 10V output LED indicators & Short circuit tolerant

Current Module
Max.range 184A
3.3V ADC
Scale the output voltage to milliamps(1/10th mV/A):179

BEC 5V output：
Designed for RC Receivers,Flight controllers,OSD,and Servos.
DC/DC synchronous buck regulator.
Voltage:5.0 +/-0.1VDC
Continuous current: 1.5Amps(Max2.0A 10s/minute)
Short-circuit tolerant(2 seconds/minute)

BEC 10V output：
Designed for Video TX or FPV camera
Voltage:10.0 +/-0.2VDC
Continuous current:1.5Amps(Max2.0A 10s/minute)
Short-circuit tolerant(2 seconds/minute)
10V can be used to power cameras labeled as 12V
The 3S LiPo input voltage should be 11V plus

Physical：
Mounting:30.5*30.5mm,Φ3mm
Dimensions:36*46*4mm
Weight:8.5g
-----------------------------------------------------------
Package Include:
1 * Mateksys FCHUB-6S PDB