Crazepony-UK 3650 4300KV 4 Pole 3.175mm Brushless Motor with Waterproof 60A ESC Combo Set and Programming Card for 1/10 RC Car Truck

4 pole 12 slot High-torque motor design,CNC Machined 6061 T6 billet aluminum heatsink can.

High purity copper windings maximizes efficiency,High RPM ABEC5 oversized bearings.

Precision balanced rotor, smoothness for best reliability and maximum RPM,Stator - super thin (0.35mm) Laminations,Removable/replaceable rotor.

Multiple protection features of the ESC: low voltage cut-off protection for lithium or nickel battery / over-heat protection / throttle signal loss protection / motor blocked protection.

The ESC is easily programmed and compatible with specified pocket-sized program card.

Motor Specifications:
Size: 3650
Watts: 900W
Max voltage: andlt;12V
Max Amps: 75A
KV(RPM/Volt): 4300KV
Max RPM: 50000
Diameter: 36mm
Length: 50mm
Shaft length: 15mm
Shaft diameter: 3.175mm
Plug type: 4mm golden banana plug
Mounting Hole: M3
Weight: 185g

Electronic Speed Controller Specifications:
Cont. Current: 60A
Burst Current: 360A
Battery: 2s Lipo / 4-9 Cells NiMh
BEC Output: 5.8V/3A (Switch Mode)
Power Supply Plugs: T Male
Motor Plugs: Female 4mm Bullet Connector
Motor Type
For 2s Lipo or 6 cells NiMH:
On-road: 3660-size or smaller motor with the KVandlt;6000
Off-road / Buggy / Monster: 3660-size or smaller motor with the KVandlt;4000
For 3s Lipo or 9 cells NiMH:
On-road: 3660-size or smaller motor with the KVandlt;4000
Off-road / Buggy / Monster: 3656-size or smaller motor with the KVandlt;3000
Size: 50.8 * 38.5 * 36.5mm
Weight: 91g / 3.2oz
Note:
1 Although this combo suitable for most 1/10 RC car/truck, please check the size especially the mounting holes of the motor before purchase.
2 The combo is waterproof for slight water. Don't put the ESC into water for a long time which may cause the fan burns.