Wizard X220S FPV Racing Quadcopter

Product #: 74144

Price:

Price drop alert!

Stock:

Out Of Stock

Store:

UnmannedTech

Categories:

FPV Drones and Accessories Racing Frames

Reviews:

5 ( 10 Review )

Add to Wishlist

Description

The new Wizard X220S from Eachine is the next generation on from the well-known and loved Wizard X220. Here at Unmanned Tech we're not thinking of the Wizard X220S as an 'upgrade' as such to the Wizard X220 - we're thinking of it as an entirely different beast. The Wizard X220S gives you the full whack of equipment with a BetaFlight-ready Omnibus F4 V4 flight controller, an 800TVL CCD camera and motors that put out a max thrust of 1100g! In comparison, the stock motors on the Wizard X220 output 440g at most. You can also shove a 5S battery on this quad to really explode off the ground. As a result, you really need to be an experienced FPV flyer to handle the fire-power on offer here so get practicing on those cheaper quads and simulators!

Key Features:

Full carbon fiber frame(older versions use some fiberglass arms/plates)
Next generation on from the Wizard X220 from Eachine
MN2206 2300Kv motors that output 1100g
Uses high quality equipment such as the Omnibus F4 V4 FC, 800TVL CCD camera and a 72Ch switchable transmitter
Choose between ATF and RTF
Now compatible with 5S batteries

Specifications:

General:

Wheelbase: 220mm
Frame arm: 4mm light material
Weight: 356g (without battery and camera mount)
Take-off weight: 561g
Package weight: 1728g
Uses light, composite material.
4mm thickness with 15mm width frame arms - width is 5mm less than Eachine Wizard X220.
Frame kit with camera angle scale and 30° camera mount for Runcam3 Gopro session.
Anti-vibration sponges to protect the quad in the event of a crash.

Eachine MN2206 2300KV motor:

KV: 2300
Max thrust: 1100G
Length: 35MM
NO.OF cell: 3-5S
Diameter: 28MM
Framework: 12N14P
Shaft: 3MM
Propeller: 5 inch
Weight: 28g

Eachine 30A BLHELI_S 4 in 1 ESC:

Con. current: 30A
Peak current (10S): 35A
Input voltage: 2-5S
BEC: No
Programming: YES
Firmware: blheli_s
Weight: 28g
Size: 36*36MM
Dshot600 compatible

Eachine 1179 800TVL CCD camera:

Color: purple
Sensor: CCD
Resolution(horizontal center): 800TVL
Shell size: 25mm*25mm
Weight: 11g
Resolution: PAL: 1980H×1080 (2MP) NTSC: 1980H×1080V (2MP)
Format: PAL/NTSC switchable
Video output: 1.0Vp-p/75Ω
Automatic gain control: 0.25/0.50/0.75/1.00 adjustable, up to 55dB.
AWB: ON/OFF
Exposure mode: electron exposure
Electronic shutter: 1/50(1/60) - 1/100000 S
Gamma correction: 0.45/1.0
Synchronization method: internal synchronization
Lens: standard 2.8mm lens
Working voltage: DC12V (Wide Voltage, measured that can be work in 5-13V)
Workig current: 70mA (low power consumption)
Workig temperature: -20℃--60℃
Humidity: 0%~98%
Strong backlighting effect

5.8G 72CH 25MW 200mw 600MW switchable transmitter:

Video Format : NTSC/PAL
Channel: 72CH
Operating Temperature : -10~85℃
Connector: SMA Female (Inner hole)
Antenna Connector: RP-SMA male (Inner needle)

BF3.1.5 Omnibus F4 V2 flight controller:

Size: 35x35mm
Mounting hole: 30.5x30.5mm
Firmware: betaflight_3.1.5_OMNIBUSF4SD
Input voltage: 2-6S
SCM: STM32 F405 MCU
Sensor: SPI Sensor MPU6000
Barometer: BMP280
Slot: standard SD card slot
BEC: 5V/3A
STM32 F405 MCU, Runs betaflight_3.1.5_OMNIBUSF4SD, could run faster loop time.
Using F4 MCU controls OSD over SPI bus in DMA mode.
OSD Configation has been included in Betaflight GUI.
Built-in 5V/3A BEC.
Built-in galvanometer.
With LC filter.

iRangeX iRX-i6X 2.4GHz 10CH remote control:

Channel: 6-10 (Default 6)
Model Type: Fixed-Wing/Glider/Helicopter
RF Range: 2.408-2.475GHz
RF Power: < 20dBm
RF Channel: 135
Bandwidth: 500KHz
2.4GHz System: AFHDS 2A / AFDHS
Modulation Type: GFSK
Stick Resolution 4096
Low Voltage Warning: < 4.2V
DSC port: PS/2 Port PPM
Chargeable: No
Antenna Length: 26mm (Dual Antenna)
Weight: 392g
Power: 6V DC 1.5AA*4
Display: STNTransflective Display, LCD 128x64 Lattice, VA 73x39mm, LCD with white backlight
Size: 174x89x190mm
On-line Update: Yes
Color: Black
Certificate: CE0678, FCC ID: N4ZFLYSKYI6X

iRangeX iR-A8S receiver:

Channels: PPM 8CH
Model type: Multi-rotor
Frequency range: 2.408-2.475GHz
Band width: 500KHz
Band number: 135
RX Sensitivity: -92 dBm
2.4GHz system: AFHDS 2A
Modulation type: GFSK
DSC port: PPM
Transfer method: FHSS
Data output: 1.5mm*3 Pin PPM
Antenna length: 26mm (Not including brass contacts)
Input power supply: 4.0-8.4V
Display method: LED
No ground interference ( Transmitting and receiving 1 m from the ground): >300m
Working current: 40mA
Each channel data: depend on the transmitter
Channel delay: <15mS
Size: 20*14*5.3mm
Weight: 1.2g
Certificate: CE0678, FCCID: N45ZA8S00

1500mAH 4S 14.8V 75C battery:

Capacity(mAh) : 1500
Cells (s): 4
Weight (g): 177
Length(mm): 80
Width(mm): 30
Height(mm): 33
Connector: XT60

Eachine 5051 3-blade propeller:

Color: purple
Quantity: 10 Pairs
Mounting Hole: 5mm

Package Includes:

RTF Version:

1 x Eachine Wizard X220S frame kit
1 x iRangeX iRX-i6X remote control
1 x iRangeX iR-A8S receiver
2 x 2206 2300KV motor CW
2 x 2206 2300KV motor CCW
1 x Eachine 30A BLHELI_S 4 in 1 ESC
1 x BF3.1.5 Omnibus F4 V2 flight controller
1 x 800TVL camera
1 x 5.8G 72CH 25MW 200mw 600MW switchable VTX
10 x Eachine 5051 3-blade propeller purple CW
10 x Eachine 5051 3-blade propeller purple CCW
1 x 1500mAH 4S 14.8V 75C battery
1 x 30° Camera Mount(For Runcam3/Gopro session)
1 x 4s Lipo charger
1 x Pagoda antenna
2 x Battery strap
2 x Wrench
Note: Runcam 3 camera NOT included

ATF Version:

1 x Eachine Wizard X220S frame kit
2 x 2206 2300KV motor CW
2 x 2206 2300KV motor CCW
1 x Eachine 30A BLHELI_S 4 in 1 ESC
1 x BF3.1.5 Omnibus F4 V2 flight controller
1 x 800TVL camera
1 x 5.8G 72CH 25MW 200mw 600MW switchable VTX
10 x Eachine 5051 3-blade propeller purple CW
10 x Eachine 5051 3-blade propeller purple CCW
1 x 30° Camera Mount(For Runcam3/Gopro session)
1 x Pagoda antenna
2 x Battery strap
2 x Wrench
Note: Runcam 3 camera NOT included