SpeedyBee F7 V2 30×30 Flight Stack w/ 45A BLheli32 ESC

Features

• DJI Plug and Play
• Built in Wi-Fi and Bluetooth
• Camera control pad
• Blackbox
• 6 Uarts, buzzer pad, and I2C
• 45A 32Bit ESC

Wiring Guide and Layout

Specifications

F7 V2 Flight Controller for DJI

• MCU: STM32F722
• IMU: MPU6000
• USB: Type-C
• Baro: BMP280 (I2C)
• OSD: BetaFlight OSD w/ AT7456E chip
• BLE Support, used for Flight Controller configuration
• WiFi Support, used for data transfer, e.g firmware
• flashing, and Blackbox analysis.
• DJI Air Unit plug: A full DJI Air Unit JST slot onboard
• BlackBox: 16MB onboard dataflash
• Current Sensor 1 : 10 (Scale 168)
• BetaFlight Camera Control Pad: Yes
• Power input: 3S – 6S Lipo
• 5V power output 7 * 5V output, 6 pads and a BZ+ pad used for Buzzer, the maximum load current is 2.5A. 9V * 1,
• the maximum load current is 2.5A.
• 9V power output 2 * 9V output, 1 pads and another one used for DJI slot
• 4.5V power output 1 * 4.5V output pad
• 3.3V power output 1 * 3.3V output pad, the maximum load current is 500mA.
• ESC signal M1 – M4
• UART: Full UART * 5(UART1, UART2, UART3, UART5, UART6)
• ESC Telemetry: UART UART4 RX
• I2C: Used for external Magnetometer, Sonar, etc.
• LED: pin Used for WS2812 LED
• Buzzer: BZ+ and BZ- pad used for 5V Buzzer
• Boot button: Yes
• RSSI input: Yes
• SmartPort: Supported
• Support Flight Controller Firmware BetaFlight(Default), EMUFlight
• Target: SPEEDYBEEF7V2
• Mounting: 30.5×30.5mm, 4mm hole size
• Dimension 41x38x6.9mm
• Weight 9g

32Bit 45A 3-6S 4in1 ESC

• Firmware: BLHeli32 SpeedyBee 4in1
• MCU: STM32F051
• Continuous Current: 45A * 4
• Burst Current: 55A(10S)
• ESC Protocol: DSHOT300/600/1200
• Power input: 3S – 6S LiPo
• Power output: VBAT
• Current Sensor Support (Scale 168)
• ESC Telemetry Support
• Mounting: 30.5×0.5mm, 4mm hole size
• Dimension: 41x45x6.5mm
• Weight: 12.5g

Includes

• 1x SpeedyBee F7 V2 30×30 Flight Controller for DJI
• 1x SpeedyBee 32Bit 45A 4in1 ESC
• Stack mounting hardware and connectors