Shendrones Thicc 2.0 FPV Cinelifter X8

Thicc V2 is a 390mm 7″ X8 made to carry larger cameras like the Black Magic Pocket. The camera mounts with a 1/4-20 screw and straps.  The V2 of this frame changes the frame configuration to be more symmetrical (no longer deadcat) which greatly improve flight characteristics to give you the best possible cinematic shots.

Arms are 8mm carbon, main body plates are 2.5mm, bottom plate is 3mm. With 2 spots for 30×30 FC stacks, standoff height is 20mm, but can easily be changed to longer standoffs if you want.

Recommended build uses 2 4-in-1 esc’s, the Lumenier Lux F7, and Brotherhobby 2806.5 1300kv’s.

This frame is not recommended for beginners as has limited instructions and can be quite tricky to install electronics inside the low profile frame.

This frame is sold with optional 3D printed parts

• Optional 3D Print parts include 4x Landing gear, fpv cam mount, and both types of camera mount dampers, DJI Air Unit sleeve, Antenna Mounts.  Full list of 3D print files are available here
• If you want to add extra 3D print files we can print them for you via our 3D print service.