R12DSM 12ch DSSS and FHSS Receiver

This is the R12DSM 12CH DSSS and FHSS receiver from RadioLink. This is a smaller version of the popular R12DS 12Ch receiver and it supports both SBUS and PPM signal. In ideal circumstances, this receiver can attain a ground control distance of 1.1km and and air distance of 4km. 

Key Features:

• Small and lightweight
• Smaller version of the popular R12DS receive from RadioLink
• Can attain control distances of 1.1km and 4Km (ground and air)
• Compatible with AT9, AT9S，AT10 and AT10II radios

Specifications:

• Channels: 12 channels
• Working voltage: 4.8-6V
• Working current: 40-180mA（input voltage: 5V）
• Size: 30*15 MM
• Weight: 2.5g
• Detachable antenna
• 4096 section precision, 0.5us per section, servo anti-shake rudder.
• Control distance: about 1100 meters ground and 4000 meters air, actually control distance depends on the environment.

Receiver Functionality:

Two signal working modes:

• Blue/purple LED, SBUS signal , 12 channels totally.
• Red LED always, PPM signal, 12 channels totally.

SBUS and PPM signal change:

Press the ID SET switch two times within 1 second and the signal will changed from SBUS to PPM. The red LED indicates the PPM and blue/purple indicates SBUS.

How to bind with transmitter:

• Place the transmitter and the receiver within 1 meter of each other.
• Turn on the transmitter and then power on the R12DSM.
• There is a black bind button on the R12DSM - press this twice in two seconds and release. The receiver light will start blinking. After approximately 8 'blinks', the receiver and radio should be bound and the LED on the receiver will turn solid.