Mobula7 2S Brushless Tiny Whoop Frsky EU LBT D16 (Standard version)

This is EU LBT version of the Mobula7 that includes a Frsky receiver.

The mobula7 from happymodel is their take on the ultimate brushless tiny whoop.  Running on 2S, the mobula 7 packs enough punch for outdoor flight, but if its raining you can still have a blast around the house thanks to the plastic prop guards.  This kit comes in two versions.  The Basic version includes 2 sets of batteries and a usb charger.  But if you want to fully get onboard the tiny whoop, the standard kit includes a better charger so you can charge multiple batteries at a time.

Key Features

• Crazybee F3 PRO version of the flight controlker support 1-2S lithium battery
• 2S indoor Whoop RC drone with stronger power and longer flight time
• Support BetaFlight tuning, multiple flight modes
• Integrated injection molding Tiny Whoop structure
• Frsky and Flysky versions of highly integrated motherboard integrated OSD, Dshot ESC, 2.4G SPI receiver, galvanometer
• DSM2/DSMX version flight control integrated OSD, Dshot four-in-one ESC, 2.4G serial receiver, galvanometer
• Frsky EU-LBT version external Frsky XM+ receiver Supports EU-LBT version remote control
• Integrate Betaflight OSD function, keep abreast of flight voltage, receiver signal, fly more calmly
• VTX comes with Smartaudio function, which can adjust the flight control parameters through the OSD to adjust the flight control PID and adjust the VTX frequency parameters.
• Completely assembled and commissioned, the hands and the remote control are flying
• Receiver optional Frsky NON-EU version (D8/D16 switchable SPI receiver), Flysky version (AFHDS/AFHDS-2A switchable), DSM2/DSMX version, Frsky EU-LBT version (external XM+ receiver)
• Camera tilt angle is adjustable
• Integrated buzzer

Basic Version Contents:

• WHOOP 75mm frame x 1
• Crazybee F3 PRO flight controller (EU LBT version) integrated ESC OSDr x 1
• SE0802 KV16000 Brushless motor x 4
• 40mm CW/CCW positive and negative paddle x 8
• 5.8G 40CH 25mW image transmission + 700TVL 1/4 CMOS camera x 1
• 3.8V 250mah ( PH2.0 ) 30/60C li-ion battery x 4
• Battery holder x 1
• USB charger x 1
• Stripper x 1
• Screwdriver x 1

Standard Version Contents:

• WHOOP 75mm frame x 1
• Crazybee F3 PRO flight controller integrated ESC OSD receiver galvanometer x 1
• SE0802 KV16000 Brushless motor x 4
• 40mm CW/CCW positive and negative paddle x 8
• 5.8G 40CH 25mW image transmission + 700TVL 1/4 CMOS camera x 1
• 3.8V 250mah ( PH2.0 ) 30/60C li-ion battery x 4
• 6-way charger x 1
• Stripper x 1
• Screwdriver x 1