MiniCube F3 Flight Stack
The MiniCube Flight Stack includes the MiniCube F3 flight controller with integrated OSD, a 4in1 10A BLHeli_S 2-3S BB2 ESC and a MiniCube receiver (choice of FrSky, FlySky and DSM2/DSMX receiver). This is the perfect combination pack for a mini brushless quad build as it includes top quality equipment in a tiny package. The three components measure just 27x27mm and of course, they are stackable making this combo kit the very definition of practicality with no birds nest of wires!
Note: To get the most out of this product we suggest you read the Minicube F3 Flight Stack Manual
Key Features:
- Includes MiniCube F3 flight controller with integrated OSD, a 4in1 10A BLHeli_S 2-3S BB2 ESC and a MiniCube receiver
- High quality equipment
- Tiny at just 27x27mm
- Stackable to economise on space
- Choice of three receiver types
- Comes with all screws and cables needed to connect to each other
Specifications:
MiniCube F3 6DOF Flight Controller with Integrated OSD
- Size: 27mm*27mm*5mm
- Mount hole: 20mm*20mm (M2 screws)
- Processor: STM32 F303 MCU
- Sensor: SPI Sensor MPU6000
- Built-in Betaflight OSD (Display Battery voltage, RSSI ,Artificial Horizon ,Flight mode ,Flight time, quadcopter name etc.)
- Firmware version: Betaflight 3.1 Dshot ready
- Based on Omnibus F3
MiniCube 4in1 10A BLHeli_S 2-3S BB2 ESC
- Size: 27mm*27mm*5mm
- Mount hole: 20mm*20mm (M2 screws)
- Firmware version: BLHELI_S 16.5
- BB2, 48MHZ Chip
- Lipo Battery: 2-3S
- Con. Current: 10A
- Peak Current: 15A (10S)
- BEC: 5V @0.1A
- Programming: YES
- Betaflight passthrough ready
- Dshot600 ready(Default)
- Support oneshot42 oneshot125 Multishot Dshot
- Damped light on
MiniCube FrSky (D8) 8CH Receiver
- Frequency range: 2.403-2.479Ghz
- Channels: 8CH
- Work mode: D8 Mode
- Output: SBUS
- Antenna length: 100mm
- No ground interference ( Transmitting and receiving 1 m from the ground): >500m
- Built-in Buzzer (Low voltage alarm) Configure by Betaflight configurator
- Working current: 80mA
- Dimensions: 27*27*7mm
- Weight: 3.5g
- Compatible with FRSKY ACCST
- Compatible with X9D(Plus)DJT/DFT/DHT
- Telemetry: RSSI, 1S-3S voltage (A1), 1S-3S voltage (A2)
MiniCube FlySky 8CH Receiver
- Channels: PPM 8CH
- Model type: Multi-rotor
- Frequency range: 2.408-2.475GHz
- 2.4GHz system: AFHDS 2A
- Work Mode: PPM
- Transfer method: FHSS
- Built-in Buzzer (Low voltage alarm) Configure by Betaflight configurator
- Antenna length: 100mm
- No ground interference ( Transmitting and receiving 1 m from the ground): >300m
- Working current: 40mA
- Size: 27*27*7mm
- Mount hole:20mm*20mm
- Weight: 3.1g
- Compatible Transmitter: Compatible with FS-i4, FS-i6, FS-i6S, FS-i6X, FS-i10, FS-GT2E, FS-GT2G, FS-GT2F
MiniCube DSM2/DSMX Receiver
- Frequency range: 2.403-2.479Ghz
- Input power: 5V
- Response time: 22ms / 11MS
- Resolution: 2048
- Display method: LED
- Operating voltage: 3.3V
- Working current: 60MA
- Size: 27mm*27mm*7mm
- Mount hole:20mm*20mm
- Weight: 3.1 g
- Antenna length: 100mm
- Data format: Serial port
- Protocol: DSM2/DSMX
- Distance: no ground interference (1 m from the ground ) > 300m
- Uses: indoor small aircraft.
- Compatible Transmitters: DSM2 / DSMX series of remote control
- Built-in Buzzer (Low voltage alarm) Configure by Betaflight configurator