Matek Power Distribution Board With 5V And 12V BEC

This is a 36x36mm power distribution board that takes the power from the battery to 4 ESCs as well as providing two synchronised & regulated DC outputs for powering cameras, servos, video transmitters, LEDs, etc. This PDB is suitable for 3-6S batteries and you can choose various voltages for your camera and transmitter. 

This is the exact replacement PDB for the Wizard X220.

Specifications:

• General:

• Input voltage range (2S-6S operation): 7.2 – 26VDC
• Regulated 5V and 12V outputs
• LED power indicators ( 5V & 12V outputs )
• 4 ESC outputs

• ESC outputs:
• Continuous current: 20A per output
• Peak current (10 seconds/minute): 30A per output

• BEC 5V output:
• Designed for RC Receivers, Flight controllers, OSD, and Servos.
• Voltage: 5.0 +/- 0.1VDC
• Continuous current: 3 Amps               
• Short-circuit tolerant (10 seconds/minute)
• LED (indicates voltage is in regulation, within 10%)
• BEC 12V output:
• The battery should be 4S~6S LiPo
• Standard output designed to power cameras and video transmitters,etc.
• Voltage: 12.0 +/- 0.2VDC
• Continuous current: 2 Amps (Max.3A 10s/minute)
• Short-circuit tolerant (10 seconds/minute)
• LED (indicates voltage is in regulation, within 10%)

CAM & VTX voltage bridge Operation

• 3S operation. choose “VCC” for 12V camera & 12V VTX,  VCC=Battery Voltage.
• 4~6S operation, choose “12” for 12V camera & 12V VTX
• 3~6S operation, choose “5” for 5V camera
• Video pass through from the “CAM” pad to the “VTX” pad

Package Includes:

• 1 x Power Distribution Board With 5V And 12V BEC