Home >
All Planes
>
Matek F411-WSE Wing Flight Controller
Matek F411-WSE Wing Flight Controller
Product #: 104842
Price:
Stock:
In Stock
Store:
UnmannedTech
Categories:
Reviews:
The Matek F411-WSE is essentially a smaller version of the F411 Wing. It basically supports all of the same features and I/O. The only downside is a slightly smaller Bec (3.5A vs 5A on the F411 Wing). But you do gain the ability for dial camera input, and an extra softserial port. Bottom line, if you are looking for a compact wing flight controller then the WSE is what you need.
- Brand name: Matek
- MCU: 100MHz STM32F411CEU6
- IMU: MPU6000 (SPI)
- Baro: BMP280 (I2C)
- OSD: AT7456E (SPI)
- Blackbox: No
- 2x Uarts
- 2x Softserial-Tx
- 2x Motors, 4x Servos outputs
- 1x I2C
- 4x ADC (VBAT, Current, RSSI, AirSpeed)
- 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
- Switchable Dual Camera Inputs
- TR/SA VTX control: Yes
- WS2812 Led control : Yes
- Beeper output: Yes
- RSSI: Yes
- Voltage devider for Analog Airspeed sensor: Yes
FC Firmware
INAV Target: MATEKF411SE
PDB
Input voltage range: 6~30V (2~6S LiPo)
2x ESC power pads
Battery Voltage Sensor: 1:10 (Scale 1100)
Current Senor: 78A, 3.3V ADC, Scale 423
BEC 5V output
Designed for Flight controller, Receiver, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed module
Continuous current: 2 Amps, Max.3A(5seconds/minute)
BEC Vx output
Designed for Servos
Voltage adjustable, 5V Default, 6V option
Continuous current: 3.5 Amps, Max.5A(5seconds/minute)
BEC 3.3V output
Designed for Baro / Compass module/OLED and Spektrum RX
Linear Regulator
Continuous current: 200mA
Physical
Mounting: 24 x 24mm, Φ2mm
Dimensions: 28 x 28 x 14 mm
Weight: 8.5g
Matek Wing Flight Controller Comparison
F411-WSE | F722-WING | F405-WING | F411-WING | |
TARGET | MATEKF411SE | MATEKF722SE | MATEKF405SE | MATEKF411 |
MCU |
100MHz
STM32F411
|
216MHz
STM32F722
|
168MHz
STM32F405
|
100MHz
STM32F411
|
IMU | MP6000 | MP6000 | MP6000 | MP6000 |
BARO | BMP280 | BMP280 | BMP280 | BMP280 |
OSD | AT7456E | AT7456E | AT7456E | AT7456E |
BlackBox | / | MicroSD | MicroSD | / |
Firmware | INAV |
INAV
BetaFlight
|
INAV
ArduPilot
|
INAV
BetaFlight
|
Dual Camera In | Yes | Yes | / | / |
5V/9V Switcher | / | Yes | / | / |
Current
Sense
|
78A |
High precision
132A
|
104A | 78A |
Max.Voltage | 30V(6S) | 36V(8S) | 30V(6S) | 30V(6S) |
Motors | 2 | 2 | 2 | 2 |
Servos | 4 | 6 | 7 | 5 |
UART | 2 | 5 | 6 | 2 |
Softserial | 2 | 1 | 1 | 1 |
Uart Inversion | RX2 | All | RX2 | RX1 |
5V for FC | 2A | 2A | 2A | 2A |
9V for VTX | / | 2A | 2A | / |
Vx for Servos | 3.5A cont. | 5A | 5A | 3A |
LDO 3.3V | 200mA | 200mA | 500mA | 200mA |
Size | 28×28 | 54×36 | 56×36 | 41×28 |
Weight | 8.5g | 25g | 25g | 12g |
Mapping
INAV MATEKF411SE | Airplane | Flying Wing | Multi-Rotor |
S1 | Motor-1 | Motor-1 | Motor-1 |
S2 | Motor-2 | Motor-2 | Motor-2 |
S3 | Servo | Servo | Motor-3 |
S4 | Servo | Servo | Motor-4 |
S5 | Servo | Servo | Motor-5 |
S6 | Servo | Servo | Servo |
–
Magnetometer | I2C (SDA, SCL) | HMC5883 /MAG3110 /QMC5883 /IST8310 | |
OLED | I2C (SDA, SCL) | 0.96″ 128*64 | |
AirSpeed Pitot | I2C (SDA, SCL) | Digital Pitot_MS4525 | |
AirSpeed Pitot | AirS pad | Analog AirSpeed sensor |
–
SBUS | Sbus pad | Built-in inverter on UART2-RX | |
GPS | UART1 (Tx1 Rx1) | Disable MSP on UART1 | |
Frsky Smartport | ST2 pad | Softserial-TX2 is enabled on TX2 pad by default | |
VTX control | ST1 pad | Softserial-TX1 is enabled on ST1 pad by default |
–
FPort | UART2 (TX2) | Need non-inverted Smartport signal(hacked) | |
GPS | UART1 (Tx1 Rx1) | Disable MSP on UART1 | |
VTX control | ST1 pad | Softserial-TX1 is enabled on ST1 pad by default |
–
PPM | RX2 Pad | Disable Serial RX on UART2 | |
GPS | UART1 (Tx1 Rx1) | Disable MSP on UART1 | |
VTX control | ST1 pad | Softserial-TX1 is enabled on ST1 pad by default |
–
CrossFire | UART2 (Tx2 Rx2) | Do not enable any functions on SOFTSERIAL2 | |
GPS | UART1 (Tx1 Rx1) | Disable MSP on UART1 | |
VTX control | ST1 pad | Softserial-TX1 is enabled on ST1 pad by default |
–
Spektrum/IBUS | UART2 (Rx2) | ||
GPS | UART1 (Tx1 Rx1) | Disable MSP on UART1 | |
VTX control | ST1 pad | Softserial-TX1 is enabled on ST1 pad by default |
Promotion vidoes
More Buying Options
£107.00
£195.00