Matek F405-CTR AIO Flight Controller

The F405-CTR AIO flight controller from Matek manages to pack in a F4 MCU, 8Kz MPU6000 noise-tolerant Gyro, Betaflight OSD, 184A PDB and Current sensor into a neat fully integrated package.  When it comes to power system, we all know Matek are the market leaders, so you know that this is a flight controller that has been designed by professionals and can handle all the latest you can throw at it.  

If you plan to use some powerful motors with your racing quadcopter, then rest assured that this F405-CTR board includes a low ESR capacitor to prevent any voltage spike feedback from the motors damaging any of your electronics.

Key Features:

Specifications:

FC Specifications

• MCU: 168MHz STM32F405
• IMU: MPU6000 accelerometer/gyro (SPI)
• Baro: BMP280 (I2C)
• OSD: BetaFlight OSD w/ AT7456E chip
• Blackbox: MicroSD card slot (SD/SDHC)
• VCP, UART1, UART2, UART3, UART4, UART5
• Built in inverter for SBUS input (UART2-RX)
• PPM/UART Shared: UART2-RX
• SoftSerial on TX2, S5 or S6 optional
• Camera control on S6 or DAC optional
• Smartaudio & Tramp VTX protocol supported
• WS2812 Led Strip : Yes
• Beeper : Yes
• RSSI: Yes

PDB Specifications

• Input: 6~30V (3~6S LiPo) w/TVS protection
• PDB: 4x30A (Max.4x46A), 6 layers*2oz copper PCB
• BEC: 5V 2A cont. (Max.3A)
• LDO 3.3V: Max.300mA for Spektrum RX
• Current Sensor 184A (Scale 179)
• Battery Voltage Sensor: 1:10 (Scale 110)

Features:

• 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
• 6x PWM / DShot outputs without conflict
• 5x UARTs
• 1x Group of  G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
• 4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
• 1x pair I2C1 pads
• 1x Side-press button for BOOT(DFU) mode
• 36x46mm PCB with 30.5mm mounting holes
• Weight: 10g

Connection Diagrams:

Resources:

For more information, check out the full F405-CTR FC listing on the Matek website