Lizard95 FPV Racing Quadcopter (BNF)

This is the Lizard95 FPV Racing quadcopter from Eachine. This mini racing machine is the perfect balance between power and flight stability. The Lizard95 comes with a F3 flight controller with a STM32 F303MCU and a 4in1 BLHeli_S ESC for super silky and stable flights but the Lizard is also lightweight and can be powered with a 3S battery. The Lizard95 is built with powerful 1104 6000Kv motors and coupled with 5-blade props resulting in explosive power off the ground. Don't be fooled by the mini appearance of the Lizard - it has a bite!

Key Features:

• Extremely lightweight and powerful mini FPV racing quadcopter
• Comes with high-quality equipment as standard including 1104 6000kv motors and 600TVL CMOS camera. 
• Simply choose the receiver type that you prefer, bind to your radio and off you go!

Please note that you may be required to complete set-up and configuration of this quadcopter via betaflight GUI.  If you are not comfortable doing this, please contact us before trying to change any settings as this can result in the quadcopter becoming unstable and crashing if you dont know what you are doing.

Specifications:

• Size:115mm*115mm*60mm
• Weight: 66g (battery not included)
• Flight controller: Betaflight F3 Flight controller built-in OSD
• Motor: Eachine 1104 KV6000 brushless motor
• Propeller: 50mm 5-blades propeller
• Camera: 600TVL HD CMOS 1/4inch
• VTX: 5.8g 25MW/100MW Switchable 48CH NTSC/PAL Video transmitter
• Battery: 11.1V 550mah 40C lipo battery
• OSD: Betaflight OSD
• Firmware of Flight controller: Betaflight 3.1
• Flight time: 4minutes
• Rear LED Ready( LED_Strip function)
• Buzzer Ready

F3 Flight Controller:

• Size:27mm*27mm*5mm
• Mount hole: 20mm*20mm
• Processor: STM32 F303 MCU
• Sensor: SPI Sensor MPU6000
• Built-in Betaflight OSD ( Batt voltage, RSSI , Artificial Horizon , Fly mode , -Flytime, Craft name etz.)
• Firmware version: Betaflight 3.1 Dshot600 ready
• Target: OmnibusF3
• Work voltage: 2S-3S lipo battery

ESC:

• Size:27mm*27mm*5mm
• Mount hole: 20mm*20mm
• Firmware version: BLHELI_S 16.5
• BB2, 48MHZ Chip
• Lipo Battery: 2S-3S
• Con. Current: 10A
• Peak Current: 15A (10S)
• BEC: 5V @0.1A
• Programming: YES
• Betaflight pass-trough ready
• Dshot600 ready(Default)
• Support oneshot42 oneshot125 Multishot Dshot
• Damped light on

Features:

• Extremely light and more powerful 3S power makes the Whisper 95 like a beast
• STM32 F303MCU + BLHELI_S ESC make your Operating feel more stability and silky
• Adjustable Angle of Camera
• Adjustable VTX Power 25mw/100mw
• Jaw-dropping flight performance
• Betaflight support
• Acro mode / Air mode /Angle mode support
• Built-in OSD(Using F3 MCU controls OSD over SPI bus in DMA mode)
• OSD Configuration has been include in BETAFLIGHT GUI
• Radio Stick to control PID Tunes
• BLEHELI_S pass-through ready
• Telemetry RSSI Output ready(Frsky Version)

Receiver Option:

• Compatible Frsky D8 modee SBUS receiver (RSSI ready)
• Compatible Flysky 8ch AFHDS2A receiver Ibus output with Failsafe
• Compatible Specktrum DSM2/DSMX receiver

Package Includes:

• 1 x Eachine Lizard95 Frame kit
• 1 x Betaflight F3 6DOF flight controller build-in OSD
• 1 x Compatible Frsky/DSMX/Flysky AFHDS2A Receiver(optional)
• 4 x Eachine 1104 6000KV brushless motor
• 1 x Minicube 10A BLHELI_S 16.5 2s-3S 4 in 1 ESC Dshot600
• 8 x 50mm 5-blades propeller (4 x CW, 4 x CCW)
• 1 x 600TVL HD CMOS 1/4 inch  camera
• 1 x 5.8g 25MW/100MW Adjustable 48CH NTSC/PAL VTX
• 1 x 11.1V 550mah 40C lipo battery XT30 plug
• 1 x WS2812 LED Board
• 1 x Buzzer(Integrated in Receiver)