iFlight Protek25 Analogue Cinematic Mini Quadcopter (PNP)

Iflight’s all new 2.5inch project is finally ready for all you content creators or those guys who like to wear some protection every now and then. Prop protection is what we’re talking about here…

ProTek is not necessarily just a Cinewhoop series but far more. Equipped with our popular XING 1404 motors in a higher kv class will give you all the power you need to get good speed, do some freestyle or carry a full GoPro through tiny gaps.

A lot of thought was put into the different assembly options. Our stock BNF will ship in the standard configuration but you can either do a pusher mod (flip the build upside down) or a lite mod (remove the protective plastic for weight optimization).

Durable plastic protectors with copper standoffs, portable compact design, easy accessable UBS port without disassembly, LED battery status, lost model buzzer and a universal GoPro TPU for a full size or naked GoPro. If you wanna go extra light, get one of our 5V balance plug GoPro power cables to get rid of the internal battery

Features

• No Props or frame in view!
• Caddx.us Turbo Eos V2 FPVCam 2.1mm 16:9 NTSC
• High performance SucceX-D 20A Whoop F4 AIO Board to save weight and space
• T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)
• Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)
• Low Resonance frame construction (Less Jello, more Cinematic footage)
• Butter smooth XING 1404 5500KV motors
• Pre-tuned with smooth freestyle settings

Factory Setup Files, Pinouts and Wiring Guides

Iflight have provided all of their factory dumps, along with frame assembly, and electronics wiring guides on their google drive folder

ProTek25 HD Quad BNF Included Components and Parts

• 1x ProTek25 Analog quadcopter BNF
• 1x Albatross LHCP RP-SMA 5.8g antenna
• 2x Nazgul 2525 propeller (Set of 4 – Color May Vary)
• 2x iFlight Lipo Strap 15*200mm (Color May Vary)

ProTek25 BNF Specs:

• – SucceX-D 20A Whoop AIO
• – Motor: XING 1404 5500KV
• – Wheelbase: 114mm
• – Body Size: 91*68.7mm
• – Bottom plate thickness: 3mm
• – Top plate thickness: 2mm
• – Top and bottom plate spacing: 24mm (aluminum standoff height)
• – Propeller size: 2.5 inch
• – FC pattern: 25.5*25.5mm / 20*20mmmm
• – FPV cam spacing: 20mm
• – Weight: 194.3g (without battery)

FC // SucceX-D 20A F4 Whoop AIO

• *Size：30.5*30.5mm
• *Mounting pattern：25.5*25.5mm/φ3mm
• *Connector：Micro-USB
• *MCU：STM32F411
• *Gyro：MPU6000
• *Blackbox：8MB
• *BEC output：5V 2A/10V 2A
• *INA pad：UART2 (nR2)
• *Barometer：no
• *Constant current：20A，25A（Burst）
• *Input：2-4S
• *Current sensor：yes
• *BLHeli：BLHeli-S
• *ESC Telemetry：no
• *Target：IFLIGHT_F411_PRO
• *ESC Firmware：G-H-30 BLS

Additional Suggested Parts

• Analog FPV Goggles (Fatshark Scout, Ev800D, Fatshark HDO)
• Radio Controller
• Battery 4S 850mAh

Important

A receiver is not included with this quadcopter, you will need to purchase and install your own that will require some soldering and configuration via Betaflight.