HolyBro PM02D Power Module

The Power Module comes completely assembled with XT60 connectors, wrapped in shrink tubing for physical damage protection.
This Power Module is designed to power Pixhawk® 5X and its accessories (GPS, radio, receiver). It is not designed to power servos, please use your aircraft’s ESC/BEC for that. The Molex 2.00mm pitch CLIK-Mate Wire-to-Board connector is rated for 3.0A current per contact.

Note: PM02D uses I2C digital signal data output and not compatible with Pixhawk4, Pixhawk4 Mini, pix32 v5, or Durandal flight controllers

Specifications

• Max input voltage: 36V
• Rated current: 60A
• Max current: 120A (<60S)
• Max current sensing: 164A
• Supports up to 6S battery
• Voltage and current monitor with I2C compatible interface
• Switching regulator outputs 5.2V and 3A max
• Weight: 20g

Current Rating

The PM02D comes with XT60 plugs with 14 AWG silicone wires rated for 30A continuous current and 60A burst current (<1 minute). If a higher current is needed, the plug type and wire size should be changed accordingly. The specifications and models are as follow

Pinout

Included

• 1x PM02D Power Module
• 1x 6pin 2.00mm pitch cable