Eachine Tyro99 DIY Drone/Quadcopter Kit (PNP)

Hailed as one of, if not THE best bang-for-your-buck kit out there, the Tyro99 will blow your socks off, and will have you flying sky high without the sky-high price to match!

With this DIY quadcopter kit that is designed to be as cheap as possible while still packing the latest features you expect from a FPV quad-copter.  To start the quad includes a F4 flight controller with integrated OSD, it also packs a 32Khz IMU so you need to make sure the FC is soft mounted when building (soft mounts are included).  You get a beefy 30A 4in1 ESC to provide enough power to the 2206 motors.  We recommend you use a 1300-1800 4S 75C lipo with the tyro to give a good balance between performance and flight time.

Notice: this is the DIY version that comes unassembled.  You will still need a receiver and battery before you can fly this quad.

Specifications

210mm Frame Kit

• Wheel base: 210mm
• Frame arm thickness: 5mm
• Bottom plate thickness: 2mm
• Side plate thickness: 2mm
• Frame kit material: 3K carbon fiber & 6065 aluminium 

2206 2150KV Brushless Motor

• Motor KV: 2150RPM/V 
• Idle current (Io/10V): 1.26A
• Lipo cell: 3-5S
• Weight: 31g
• Max continuous current: 31A
• Max continuous power: 496W
• Max thrust: 1050g (4S/5″)
• Configu-ration: 12N/14P
• Motor resistance (RM): 0.0572 Ω 
• Stator diameter: 22mm
• Stator thickness: 6mm
• Motor diameter: 27.7mm
• Motor body length: 19.2mm
• Overall shaft length: 34.2mm
• Prop adapter shaft: M5
• Bolt holes spacing: 16mm
• Bolt thread: M3
• Propeller: 5-6 inch

4 IN 1 30A BLHeli_S ESC

• Continuous current: 30A
• Peak Current: 40A(10S)
• Input voltage: 2-5S
• BEC: 5V 2A BEC
• Main control chip: 48Mhz EFM8BB2
• Firmware: BLHeli_S supports Dshot600
• MOS: 5*6

Customised F4 Flight Controller

• Main control chip: STM32F405
• Sensor: ICM20602 6-axis
• Power supply: 5V
• Integrated OSD
• Onboard LC filter
• PID cycle rate & gyro refresh rate up to 32Khz
• BetaFlight racing firmware

700TVL COMS Camera

• Case size: 25mm*25mm
• Weight: 9.5g
• Total pixels: PAL: 1020H×596V (0.61MP); NTSC: 1020H×508V (0.52MP)
• Effective pixels: PAL: 976H×582V (0.57MP); NTSC: 976H×494V (0.48MP)
• Signal system: PAL/NTSC switchable
• Resolution ratio(horizontal center): 700TVL
• Video output: 1.0Vp-p/75Ω
• Automatic gain control: 0.25/0.50/0.75/1.00, up to 55dB
• White balance: on/off optional 
• Exposure mode: electron exposure
• Electronic shutter: 1/50(1/60) – 1/100000 S
• Gamma correction: 0.45/1.0
• Synchronization method: inter-sync
• Camera lens: standard 2.8mm
• Lens operating voltage: DC12V (wide voltage, measured can work normally at 7.5-13V)
• Working current: 70mA (low power consumption)
• Working temperature: -20℃~-60℃
• Humidity: 0%~98% 

5.8G 40CH 0mW/25mw/200mw/600mw switchable VTX

• Output power & transmission distance: ≥0.5km@25mW, ≥1km@200mW, ≥2km@600mW
• Transmitting power: 0mW/25mW/200mW/600mW
• Full video format: NTSC /PAL
• Input voltage & power dissipation: 7V~24V, +12V/260mA@600mW
• Size: 20*30*9mm
• Weight: ≤7g(except antenna)
• With output power self-check function.
• Nixie tube SCAN: frequency point (1-8), frequency band (A-E), power (1-3, 0=0mw, 1=25mw, 2=200mw, 3=600mw)

Racerstar 5038 2 Blade Propeller

• Material: PC
• Mounting hole: 5mm
• Center thickness: 8mm
• Quantity: 10 pairs
• Color: blue, red, yellow, purple, white
• Weight: 7.25G a pair 
• Delivery color randomly (10 pairs of propellers are the same color)

Battery Not included
Recommend 3-5S – idealy a 1500 4S 75C Lipo

Kit Contents
1 x 210mm frame kit
2 x 2206 2150KV brushless motor CW
2 x 2206 2150KV brushless motor CCW
1 x 4 IN 1 30A BLHeli_S ESC
1 x Customized F4 flight controller
1 x 700TVL COMS camera
1 x 5.8G 40CH 0mw/25mw/200mw/600mw switchable VTX
2 x Battery strap
10 x Racerstar 5038 2 blade propeller CW
10 x Racerstar 5038 2 blade propeller CCW