DJI Naza-M V2 Flight Controller and GPS Combo

The Naza V2 Flight controller comes with the DJI v2 PMU and v2 LED modules included. 

GPS Module included.

Features:

• All-in-one design: The Naza-M V2 provides better flight performance. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer and barometer in its light and small Main Controller. It can measure flying altitude, attitude and therefore can be used for autopilot/automatic controlling.

• Advanced and Improved Attitude Stabilization Algorithm: It is more flexible and stable, and gives the hobbyists a wonderful flight experience. New features have been included such GPS course automatic compensation, GPS & Compass sensor calibration, new take-off mode and so on.

• Nine types of multirotor supported: Naza-M V2 now supports nine types of multi-rotor, which meets the different needs of the enthusiasts:Quad I, Quad X; Hexa I, Hexa V, Hexa Y, Hexa IY;Octo X, Octo I, OctoV

• Mulitiple Flight Control Modes/Intelligent Switching: It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode.  It also can adjust automatically in the flight environment and intelligent switch between GPS Atti. Mode and Atti. Mode to make sure the safety and security of flight.

• Intelligent Orientation Control: Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction.

• Enhanced Failsafe Mode: If your transmitter supports failsafe, then you can set failsafe through port-U.

• Two Levels of Low Voltage Protections: In order to prevent your multi-rotor from crash or other harmful consequences caused by low battery voltage, we have designed two levels of low voltage protection.

• PPM, S-BUS and Ordinary Receiver Supported: Four channels and more than four-channel receiver supported, also PPM and Futaba S-Bus receiver supported. PPM & S-Bus receivers (the general use of the first 8 channels of S-Bus receiver) to optimize the channel connection, the A, E, T, R, U five-channel function are set in a channel of X2, use only one servo cable to connect the PPM or S-Bus to X2 can makes installation quick and easy, not easy to make mistakes.

• Built-in Gimbal Stabilization Function: The gimbal stabilization module is compatible with almost all 2-axis gimbal systems. The system will adjust the gimbal and camera according to the attitude of the aircraft after setting the parameters the first time.

• Multi-rotor One Power Output Fail Protection: In most conditions, the whole multi-rotor will retain good attitude and rotate around the frame arm with no power output, due to imbalanced mechanical structure and external environment. This humanistic protection function from Naza-M V2, in Attitude or GPS Mode, makes attitude still under control even with any one power output failed and highly reduces crash risk.

• New Assistant Software and Firmware Online Update: The user interface of the assistant software has been comprehensively updated and brings you a new interaction experience, and instructions will automatically appear which is very convenient.

GPS:

 The plug and play GPS module will greatly enhance the performance for entry AP with Position Hold, Return-To-Home and Intelligent Orientation Control functions. With GPS Module, the multi-rotors will have position and altitude locked even in windy conditions. Hovering accuracy is about 2.5m horizontal and 0.8m vertical.