Naze Acro Rev 6 Funfly Control Board

We now have the Rev6 Naze boards in stock at T9. This is the newest version of the popular Acro Naze32 flight controller board.
At the heart of the Naze32 is a 32bit ST micro work horse of a processor, with untapped memory and cpu power and a host of equally impressive sensors. The Naze is also matched up with some of the nicest GUI programs and features to get the most out of your configuration.

STM32F103CBT6 32-bit ARM Cortex M3 processor (72MHz, 3.3V)
Invensense MPU6500 MEMS accelerometer + gyro
BMP280 Barometer
Built-in Micro-USB for programming/firmware update
36x36mm size, ~5 gram weight w/o headers
Made in JAPAN
Shipping with 16V input capable voltage regulators
These come with pin headers (straight and right angle options), NOT soldered to the board.

Naze32 rev6 Features:

USB on right side
PPM/PWM input as through-hole
3.3V, I2C on standard-size headers
Fully pinout compatible with rev5 accessories (OSDoge etc)
SBUS Inverter
Spectrum satellite
MPU6500
Sonar pads w/resistors added for direct connection to 5V sonar
All extra pads (FT, GP, A5) on top, only sonar on bottom
BMP280 barometer
16mbit flash

Specs:

36x36 mm (30.5mm Mounting)
5.3 grams (no headers, 7.3 grams with)
2000 degrees/second 3-axis MEMS gyro + accelerometer (MPU6500)
Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense line

Included:

Acro Naze32 rev6
Break out PWM cable
2x5 pin header
2x3 pin header (right angle), 2x3 pin header (straight)
3x6 pin header (right angle), 3x6 pin header (straight)
1x10 pin header