TBS Smoke Stopper XT60 and XT30 Version

Avoid imminent disaster with the TBS Smoke Stopper: A self-healing / resettable fuse in line of the power going to your quad.

The first time you power your drone is often called the "smoke test". If everything powers up fine, you've passed, if not, you'll be inhaling blue magic smoke and replacing parts! Not with the TBS Smoke Stopper! Compared to standard smoke stoppers, the TBS Smoke Stopper offers much lower trip and hold currents, as well as faster reaction time. We also provide a wider variety of input voltages and in- & output connectors than any other smoke stopper!

SPECIFICATIONS

• Connector: XT30 & XT60 (input and output)
• Input voltage: 1-14S (3 - 60V)
• Trip current: 1.0A
• Hold current: 0.5A

Disclaimer: This is just a fuse. Something may still break by the time the fuse trips. It won't protect against all kinds of damages, but it's still way better than nothing at all

Note: Solid State Smoke Inhibitor/ Lightbulbs / Fuses / Circuit breakers are not 100% foolproof way of keeping the magic smoke in. It’s always best to use in conjunction with a multimeter. This is NOT an end all be all kind of protection. Nothing is. It is best at protecting against a soldering short. If you wire something wrong, it will likely still blow (ie apply 16v to a 5v system). This is a failsafe, one that will probably help you but may not depending on the kind of error you make. Double check wiring schematics, check your gear with a multimeter, and lastly use a Smoke Stopper. Do not wire things up randomly and hope a Smoke Stopper will save you!