Matek F411-Mini SE 20x20mm Flight Controller

Matek F411-Mini SE 20x20mm Flight Controller 

The Matek F411-Mini SE has a built-in OSD and MPU-6000 gyro. The board as standard is 20x20mm mounting holes but also comes with a 30.5x30.5mm mounting adapter board. The FC runs on Betaflight as standard using the MatekF411SE target, but can be flashed with INAV software. It also comes with Vibration isolation mounting hardware to ensure smooth vibration free flying. 

FC Specifications

• MCU: 100MHz STM32F411CEU6
• IMU: MPU6000 (SPI)
• Baro: BMP280 (I2C)
• OSD: AT7456E (SPI)
• Blackbox: No
• 2x Uarts
• 2x Softserial-Tx
• 6x PWM outputs (Dshot/Proshot/oneshot/multishot)
• 1x I2C
• 3x ADC (VBAT, Current, RSSI)
• 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
• 1x SH1.0_8pin connector (Vbat/G/Curr/R6/S1/S2/S3/S4)
• TR/SA VTX control: Yes
• Camera control: Yes
• WS2812 Led control : Yes
• Beeper output: Yes
• RSSI: Yes
• Filtered Vbat output power for VTX,  Switchable via AUX (modes tab-user1)
• Convertible 20mm to 30.5mm mounting

Power

• Input: 6~36V (2~8S LiPo)
• BEC: 5V 2A cont. (Max.3A)
• LDO 3.3V: Max.200mA
• Battery Voltage Sensor: 1:10 (Scale 110)
• No Current Sensor built-in, supports external current sensor of PDB/4in1

FC Firmware

• INAV Target: MATEKF411SE
• BF unified Target: MATEKF411SE(MTKS)

Physical size:

• Mounting
  • 20 x 20mm/Φ3mm with Silicon Grommets
  • 20 x 20mm/Φ2mm with Silicon & Brass Grommets
  • 30.5 x 30.5mm/Φ3mm with Conversion Plate and Silicon Grommets
• Dimensions:  28 x 28 mm
• Weight: 5g

Included:

• 1x F411-miniSE
• 1x 20mm to 30.5mm conversion plate
• 6x Silicon grommets M4 to M3
• 6x Brass grommets M3 to M2
• 1x SH1.0_8pin cable 5cm
• 2x SH1.0_8pin connectors

Download the PDF manual here

Layout picture: