Rc Parts Catalog, United Kingdom
Home > Armattan Badger 5" Frame Kit with Free TPU Session Mount
Armattan Badger 5" Frame Kit with Free TPU Session Mount

Armattan Badger 5" Frame Kit with Free TPU Session Mount

Product #: 98063
Price:
Stock:
Out Of Stock
Store:
Quadcopters
 
Categories:
Reviews:

The Armattan Badger is the newest FPV Frame again with Lifetime bumper to bumper warranty. And for Limited time only they come with a Free TPU Session 5 mount. 
Using the same titanium cage as the Marmotte the badger has removable arms and come with a chamfered finish.
The badger will appeal to freestyle Fpv pilots due to its unique design and heavily protected titanium camera area.

The humble badger is the namesake of Armattan's newest flagship.  With a design based off of the Marmotte frame, the Badger updates it with removable arms: carefully designed to ensure a rock-solid construction.
If you already own the Marmotte frame and wish to switch to the badger there is a conversion kit here

The Cage

This is the newest revision of Armattan's titanium cage; the same as on the Marmotte. And just in case you haven't heard what the perks of this cage are compared to any other, we'll run through them quickly here.

- Independent HD camera tilt means there's no need to deal with foam wedges for the front or back of your recording camera.
- A wide range of FPV cam tilt options. From 10 degrees to way too much.
- 1mm FPV-cam savers: these are designed to bend so your camera won't break.
- A minimized weight due to a state of the art, 6-axis milling process.

And the best part?  All of these perks come on top of the firm mount and incredible protection that you've come to expect from an Armattan product.

The Arms

Since having removable arms is the major draw for this release, we wanted to specifically mention how they work.  The arms mount up with two bolts and two sunk-nuts each.  The sunk-nuts go straight into the 4mm baseplate, so there's no need to worry about delamination.  When installed, the arms meet in the center of the baseplate, further locking down the construction.  We're providing you with a remarkably solid, precise product, and we know that you will have full confidence in this frame.

Other Details

This frame comes with tons of other bells and whistles.  As you've come to expect, an extended-aluminum rear provides a protected mount for your VTX antenna no matter whether you use a TBS, SMA, or U.FL style connector.  The frame maintains compatibility with 5.5 inch props for those of you who like to ride the line, and the long body means you can more easily fit an HD camera and a bigger lipo, even with high cam tilt. The FC can mount up on either the 30.5mm or 20mm options, and there are even 20mm rear provisions as well for a VTX or any other board.

Add the differences in carbon and the extra hardware, and you're probably expecting this frame to be considerably heavier than the fixed arm version (the Marmotte).  Well due to our experience in design and some clever optimization, we've kept the difference down to 15g.  You can thank us later.

The Warranty

I almost can't believe we're still having this conversation, but keep in mind that we'll never stop reassuring you. Full warranty protection.  
Cage.  Carbon.  Everything.  


Included

Titanium:
2x Camera-cage brackets
2x Camera-cage anchors

Hardware:
10x 4mm M3 iron bolts
14x 6mm M3 12.9 grade steel bolts
8x 8mm M3 12.9 grade steel bolts
10x 10mm M3 12.9 grade steel bolts
12x Sunknuts
4x 16mm M3 iron bolts
6x 2.5mm M2 cuphead iron bolts

Aluminum:
1x 23mm front standoff
2x tail posts
2x camera savers

Nylon:
4x 6mm M3 standoffs
4x nuts
2x M6 nylon washers

Carbon Fiber:
1x 2mm Top (LiPo) plate
1x 1.5mm HD Cam plate
1x 4mm Main plate
2x Antenna mount plates (TBS and SMA)

Other:
1x Lipo strap
1x LiPo foam pad
1x HD camera foam pad
4x Dog-bone landing pads
1x Antenna mount
1x SMA grommet
1x Diamond-coated steel file
1x Build instructions

Optional Extras
TPU Mount Optional Here

Badger Specs

Frame Weight approx. 130 grams
Motor to Motor 236mm
Frame Shape Compressed X 
Main Plate Thickness 4mm
Arm Thickness 4mm

Hardware

Steel Bolts
Titanium Cage
Aluminum Standoffs                
              Motor Mount Pattern 22xx
FC Stack Mount

20mm and 30.5mm compatible

FPV Camera Mount Mini-camera (21mm)
FPV Antenna Mounts TBS, SMA and U.FL compatible
Max Stack Height 20mm 
Warrantied Parts All
Recommended Components
Motor Size 2306
ESCs 30a-45a
Prop Size Up to 5.5"
LiPo 4-5S/1500mAh - 4s 1800mah


Please note the Free session 5 TPU will be a random colour of our choice. 


Promotion vidoes